Kenmore 297310600 manual Troubleshooting, Problemcause, Correction, Freezer Does Not Run

Models: 297310600

1 11
Download 11 pages 12.39 Kb
Page 10
Image 10
TROUBLESHOOTING

TROUBLESHOOTING

Before calling for service, review this list. It may save you time and expense. This list

 

includes common occurences that are not the result of defective workmanship or

GUIDE

materials in this appliance.

PROBLEMCAUSE

CORRECTION

FREEZER DOES NOT RUN

Freezer does not run.

Freezer runs too much or too

long.

o Freezer is plugged into a circuit that has a ground fault interrupt.

o Temperature control is in the OFF position.

o Freezer may not be plugged in, or plug may be loose.

o House fuse blown or tripped circuit breaker.

o Power outage.

o Room or outside weather is hot.

. Freezer has recently been disconnected for a period of time.

. Large amounts of warm or hot food have been stored recently.

. Doors are opened too frequently or too long.

. Freezer door may be slightly open.

. Temperature Control is set too low.

. Freezer gasket is dirty, worn, cracked, or poorly fitted.

. Use another circuit, tf you are unsure about the outlet, have it checked by a certified technician.

. See Setting the Temperature Control Section.

. Ensure plug is tightly pushed into outlet.

o Check/replace fuse with a 15 amp time-delay fuse. Reset circuit breaker.

o Check house lights. Call local Electric Company.

o It'snormal for the freezer to work harder under these conditions.

o It takes 4 hours for the freezer to cool down completely.

. Warm food will cause freezer to run more until the desired temperature is reached.

. Warm air entering the freezer causes it to run more. Open doors less often.

. See "DOOR PROBLEMS" Section.

o Turn control knob to a warmer setting. Allow several hours for the temperature to stabilize.

o Clean or change gasket. Leaks in the door seal will cause freezer to run longer in order to maintain desired temperature.

Interior Freezer temperature is too cold.

Interior Freezer temperature is too warm,

Freezer external surface

temperature is warm.

SOUND AND NOISE

Louder sound levels whenever freezer is on.

Longer sound levels when compressor comes on.

. Temperature Control is set too low.

. Temperature Control is set too warm.

. Door is kept open too long or is opened too frequently.

. Door may not be seating properly.

. Large amounts of warm or hot food may have been stored recently.

. Freezer has recently been disconnected for a period of time.

. The external freezer walls can be as much as 30°F warmer than room temperature.

o Modern freezers have increased storage capacity and more stable temperatures. They require a high efficiency compressor.

. Freezer operates at higher pressures during the start of the ON cycle.

. Turn the control to a warmer setting. Allow several hours for the temperature to stabilize.

. Turn control to a colder setting. Allow several hours for the temperature to stabilize.

. Warm air enters the freezer every time the door is opened. Open the door less often.

. See "DOOR PROBLEMS" Section.

. Wait until the freezer has had a chance to reach its selected temperature.

. Freezer requires 4 hours to cool down completely.

. This is normal while the compressor works to transfer heat from inside the freezer cabinet.

. This is normal. When the surrounding noise level is low, you might hear the compressor running while it cools the interior.

. This is normal. Sound will level off or disappear as freezer continues to run.

10

Page 10
Image 10
Kenmore 297310600 manual Troubleshooting, Problemcause, Correction, Freezer Does Not Run, Sound And Noise