Kenmore 790.324, 3241 manual Grounding instructions, Liquefied Petroleum Propane Gas Conversion

Grounding instructions

This appliance is equipped with a 3-prong grounding plug for your protection against shock hazard and should be plugged directly into a properly grounded receptacle. DO NOT cut or remove the grounding prong from this plug. If a 2-prong wall receptacle is the only available outlet, it is the personal responsibility of the consumer to have it replaced with a properly grounded 3-prong wall receptacle installed by a qualified electrician.

Avoid fire hazard or electrical shock. DO NOT use an adapter plug, an extension cord, or remove grounding prong from electrical power cord. Failure to follow this warning can cause serious injury, fire or death.

See the INSTALLATION INSTRUCTIONS packaged with this cooktop for complete installation and grounding instructions.

Grounding
type wall
receptacle	Do not, under	any
	circumstances,	cut,

remove, or bypass the grounding prong.

Power supply cord with 3-prong grounding plug

Liquefied Petroleum (Propane) Gas Conversion

This appliance can be used with Natural Gas and Propane Gas. It is shipped from the factory for use with natural gas.

If you wish to convert your cooktop for use with propane gas:

For models with Open Burners, convert according to directions in the Gas Cooktop Installation Instructions.

For models with Sealed Burners, convert according to the instructions in the attached envelope marked FOR LP/PROPAN E GAS CONVERSION.

Only a qualified service agent should perform the L. R conversion. Contact the local gas provider for conversion. An L. R Conversion Kit is supplied with this range and is located on the main back of the range. The kit contains installation instructions which must be read before and followed carefully when installing the kit.

Severe electrical shock, or damage to the cooktop, may occur if the cooktop is not converted by a qualified installer or electrician.

To avoid serious injury, any additions, changes or conversions required in order for this appliance to satisfactorily meet the application needs must be made by a qualified service agent.

!iI...................

...........ii