Kenmore 385.11607, 385.12614 owner manual Buttonholes, Blue zone === Sliding buttonhole foot

SECTION 3. LEARN THE STITCHES

Buttonholes

Set the Machine

Stitch Stitch selector

Top thread tension Stitch length control

control 1 [o 5

blue zone ===

Sliding buttonhole foot

_							j
Adjusting		the	Stitch		Density
Depending		upon		your fabric			or your
own	preference			in	buttonholes,		you
may	alter		the		buttonhole		stitch
density		within		the	blue	buttonhole
range	on	the	stitch		length	dial.

1. a. Carefully mark the buttonhole length on your garment,

b, Change to the sliding buttonhole foot.

c. nsert the garment under the

foot with the buttonhole mark- ing running toward you.

2.a. Move the slider (A) toward you so that the top mark (C) on the slider meets the start mark (B).

b.Line up the markings on the foot with the top mark on your garment.

c.Lower the presser foot.

NOTE: The markings on the slider are engraved in centimeters.

3. a. Set the stitch selector at _ .

a i

b. Sew forward unti you reach the

front marking of your button- hole.

c. Stop sewing at the left stitch

(_) For more			density,		turn		the	dial
toward		"0".
(_) For		less	density,		turn		the	dial
toward		"1	".
NOTE:	Always		make		a	practice		but-
	tonhole		on	a	scrap		of fabric
	you plan			to	use	to	find	the
	more		suitable		stitch		length.

3>	@
forFne	Coarse
stitches	stitches
light	for neavy
fabric	fabrics

\,

34