Kenmore 44733 iCE MAKER iNSTALLATiON, Interior Light, Tilt=Out Shelf, Adjustable Interior Shelves

DOOR REMOVAL

If door must be removed:

1.Gently lay freezer on its back, on a rug or blanket.

2.Remove two base screws and base panel.

3.Remove bottom hinge screws.

4.Remove plastic top hinge cover.

5.Remove screws from top hinge.

6.Remove top hinge from cabinet.

7.Remove door and bottom hinge from cabinet.

8.To replace door, reverse the above order and manner of removal. Securely tighten alJ screws to prevent hinge slippage,

iCE MAKER iNSTALLATiON

If your Freezer has an automatic ice maker, please refer to the two inserts in the bond pack that came with your Freezer (1. Installation Instructions & 2. Installation - Connecting be Maker to Water Supply) to correctly hook-up your ice maker.

COOL DOWN PERIOD

,,For safe food storage, allow 4 hours for the freezer to cool down completely. The freezer will run continuously for the first several hours. Foods that are already frozen may be placed in the freezer after the first few hours of operation. Unfrozen foods should NOT be leaded into the freezer until the freezer has operated for 4 hours.

,,When loading the freezer, freeze only 3 pounds of fresh food per cubic foot of freezer space at one time. Distribute packages to be frozen evenly throughout the freezer. It is not necessary to turn the control knob to a colder setting while freezing food.

TEMPERATURE CONTROL

The temperature control is located inside the freezer compartment. The temperature is factory preset to provide

satisfactory	food	storage temperatures.
However, the temperature control is
adjustable to provide a range of
temperatures	for your personal
satisfaction. If a colder temperature is
desired, turn the temperature control
knob toward COLDEST and allow
several hours for temperatures to
stabilize between		adjustments.	Cold Control

INTERIOR LIGHT

The light comes on automatically when the door is opened. To replace the light bulb, turn the temperature control to OFF and unpmug the electricam cord. Replace the old bulb with a bulb of the same wattage.

SLIDE-OUT BASKET

A Slide-Out Basket located at the bottom of the freezer, provides separate storage space for items that are difficult to store on freezer shelves. To remove the basket, pull out and lift up.

TILT=OUT SHELF

This shelf is located inside on the freezer door and provides additional storage space. To access an item, tilt top of "basket" shelf down.

ADJUSTABLE INTERIOR

SHELVES

Multi-position adjustable interior shelves can be moved to any position for larger or smaller packages. The shipping spacers that stabilize the shelves for shipping may be removed and discarded.

TO ADJUST CANTILEVER SHELVES

Lift front edge up.

Pull shelf out.

Replace the shelf by inserting the hooks at rear of the shelf into the wail bracket. Lower the shelf into the desired slots and lock

into position.

Slide=Out Basket

Tik-Out Shelf

Adjustable Interior Shelves = Upright Models