DOOR REMOVAL
If door must be removed:
,,Unplug the unit
,,Gently lay refrigerator on its back, on a rug or blanket•
,,Remove two base screws and base panel• Remove wire from clips on bottom of cabinet, if required•
,,Unplug connector, if required, by holding the cabinet connector in place and pulling the door connector out.
,,Remove the bottom hinge screws•
,,Remove the plastic top hinge cover•
,,Remove the screws from the top hinge•
,,Remove the top hinge from the cabinet•
,,Remove the door and bottom hinge from the cabinet•
,,To replace door, reverse the above procedures and securely tighten all screws to prevent hinge slippage•
Base
BasePanel Screws
iNTERiOR LiGHTiNG
The light comes on automatically when the door is opened• The light bulb assembly is located on the back of the refrigerator control box. To replace the light bulb, turn the temperature control to "OFF" and unplug the electrical cord. Replace the old bulb with a bulb of the same type and wattage.
Hinge Screws | SPILL PROOF SLIDE=OUT | GLASS SHELVING | |
| adjustable slide out glass shelves can be moved | ||
| to any position for larger or smaller packages• The shipping | ||
| spacers that | stabilize the shelves for shipping may be removed | |
| and discarded• | ||
Cabinet Connector
COOL DOWN PERIOD
For safe food storage, allow four (4) hours for refrigerator to cool
down completely• The refrigerator will run continuously for the TO ADJUSTTHE SHELVES first several hours•
ELECTRONIC TEMPERATURE CONTROL
The electronic temperature control is located inside the refrigerator• Temperature is factory preset to provide satisfactory food storage temperatures• However, the temperature control is adjustable to provide a range of temperatures for your personal satisfaction• To adjust the temperature setting, move the UP (A) button for warmer temperature and DOWN (Y) button for colder temperature on the control panel• Allow several hours for the temperature to stabilize between adjustments•
®Lift front edge up.
®Pull shelf out
®Replace the shelf by inserting the hooks at rear of the shelf into the wall bracket• Lower the shelf into the desired slots and lock into position•
FRDGETEMP
7is coNest O is off
