Location

How It Works

Operating Steps

Selecting a Location

IMPORTANT:

1Dehumidifier must be operated in an enclosed area to be most effective, Close all doors, windows, and other outside openings to the room.

2, Be sure not to obstruct the air flow through the front grille or out of the louvers on the left side,

,A dehumidifier operating in a basement will have little or no effect in drying an adjacent enclosed storage area, such as a closet, unless there is adequate circulation of air in and out of the area.. It may be necessary to install a second dehumidifier in the enclosed area for satisfactory drying.

When the unit is started, the fan begins to pull moisture-laden air across the dehumidifying coils The coils condense or draw moisture from the air, and air flows

through the side louvers into the room as dry, warm air. Moisture removed from air is collected in a bucket on the front of the dehumidifier,,

NOTE: This unit is equipped with Electronic Control Protection. There is a 2 minute delayed start after one of the following occurs:

. The bucket is removed

=Dehumidifier Level changes

To begin operating the dehumidifier, follow these steps:

I Plug the power cord into a properly grounded 1101120 volt AC outlet

Note: Before operating this unit, see the "Removing Collected Water" section for proper placement of the bucket Models will not operate if the bucket is not properly positioned

2.When first using the dehumidifier, set the control to the MAX.DRY position The unit will run continuously at this setting

Note: The dehumidifier should be kept in operation as long as excess moisture is present in the room air

3.Set Fan Speed to HI. The HI setting is recommended for faster moisture removal

4.Allow the dehumidifier to operate at the above settings for three to four days. After this time, adjust the controls as needed See below.

Electronically Controlled Dehumidifier Operating Instructions

ON/

 

ON/

 

OFi

 

 

 

TO

 

TO

_ FULL

CONTROL

FULL

CONTROL

DEGREEOF

ili!!iilBUCKET

DEGREEOF

BUCKET

DEHUMIDIFICATION

LIGHT

DEBUMIDIFICATION

'_ili!!!iiLIGHT

_

 

 

Please familiarize yourself with the Control Panelbefore you begin Your Dehumidifier can be operated from 15% MAX to 75% MIN Relative Humidity, at either High or Low Speed (except 5030),

Page 2 Page 4
Page 3
Image 3
Kenmore 5045, 5030, 5065, 5055 owner manual How It Works Operating Steps, Selecting a Location
Page 2 Page 4

5055, 5065, 5030, 5045 specifications

The Kenmore series of washing machines, including models 5030, 5055, 5065, and 5045, exemplify reliability and efficiency in home laundry care. These models are designed to cater to the needs of modern households, incorporating advanced technologies and practical features that enhance the washing experience.

The Kenmore 5030 is a solid entry-level model that highlights simplicity and effectiveness. It boasts a user-friendly interface with multiple wash cycles tailored for different fabric types. With a capacity of up to 4.5 cubic feet, it caters to small to medium-sized loads. Key features include an automatic load sensing technology that optimizes water usage, ensuring efficiency without sacrificing performance.

Moving up the lineup, the Kenmore 5055 introduces additional capabilities, including smart wash options that automatically adjust the wash settings based on soil levels. This model not only offers a larger capacity but also includes steam cleaning technology, which helps remove stubborn stains and sanitizes laundry in the process. The 5055 is designed to perform quietly, making it an ideal choice for homes where noise levels are a concern.

The Kenmore 5065 takes washing to the next level with an array of high-tech features. It incorporates Smart Motion technology, which adjusts the wash motion, speed, and duration for different washing needs. This model also features a direct drive motor, reducing vibrations and enhancing durability. With an even larger capacity of 5.2 cubic feet, it is perfect for larger families or heavy laundry days.

Lastly, the Kenmore 5045 strikes a balance between performance and practical features. This model features a variety of wash cycles, including a quick wash option for those on the go. Additionally, it has an intuitive control panel that provides easy access to settings and options. The 5045 is also designed with energy efficiency in mind, qualifying for Energy Star ratings, helping to save on utility bills while being environmentally friendly.

Overall, the Kenmore 5030, 5055, 5065, and 5045 washing machines provide a range of features and technologies that meet the diverse needs of consumers. From user-friendly interfaces to advanced washing technologies, these models stand out as dependable choices for effective laundry care.
Top Page Image Contents