1, Pull out the bucket cover. | 2. Cleaninside of bucket with | 3. Replacethe bucketcover. |
• Placethumbat position _) and | brush or dampenedcloth. | • Makesuretabs (_and _are |
pull outward.Placeother handat | • We recommendusing a mild | placedas shown. |
position(_ andpull up. | detergentsolution. |
|
| Blush of |
|
I.Empty the bucket manually.
When the bucket is full, pull out and empty it into a large sink or tub and then replace it properly.
•Do not overtighten the hose when connecting it to the bucket. Use a rubber washer and tighten by hand firmly without stripping the plastic threads.
•Be careful while taking out the bucket as it can cause damage.
•Please do not shake strongly when you carry the bucket. Itcan
cause to breakage of the handle or bucket cover.
It is advisable to carry the bucket by supporting it from the bottom.
2.Attach a length of garden hose hose connection to carry water
The bucket has a threaded hose connection which can be left open. Drill a 1/4" (6.4 ram) hole in the center of the hose connection, Once opened, the hose connection
will continually drain water from the bucket.
•The nozzle cannot be fixed after puncture. Use an ordinary garden hose cap to reclose if necessary.
•When insertingthe bucket into the unit. lifting upthe bottom tip of the bucket lightly makes insertion easily.
to the threaded bucket drain to the orein,
•When being attached to the bucket drain hose connection, be sure the hose doesn'tkink or bend. It should lieflat from the dehumidifier to the drain.
•The hose attachment will accept a
standard garden hose filling. You can attach a
