Figure 36. Hold the main table and loosen the
lock lever.
Main Table Height
Periodically through normal operation of the Model 1688 Edge Sander, the belts will wear in certain areas. To compensate for this wear and ensure consistent sanding or to adjust for a workpiece, you can adjust the main table high- er or lower. The table is fitted with springs to make the adjustment quick and easy.
To adjust the table height, do these steps:
1.With one hand, hold the main table, and with the other hand loosen the main table lock levers. See Figure 36.
3.Raise or lower the main table to the desired height, and tighten the main table lock levers.
ADJUSTMENTS
