To remove the crisper(s) cover:

1.Remove crisper(s).

2.Holding the glass insert firmly with one hand, press up in center of glass insert until it rises above the plastic frame, Gently, slide the glass insert forward to remove.

3.Lift the cover frame up and remove it.

To replace crisper(s) cover:

1.Fit back of cover frame into supports on side walls of the refrigerator and lower the front of the cover frame into place.

2.Slide rear of glass insert into cover frame and lower front into place.

You can control the amount of humidity in the moisture-sealed crisper. Adjust the control to any setting between LOW and HIGH.

LOW (open) lets moist air out of the crisper for best storage of fruits and vegetables with skins.

Fruit: Wash, let dry and store in refrigerator in plastic bag or crisper. Do not wash or hull berries until they are ready to use. Sort and keep berries in original container in crisper, or store in a loosely closed paper bag on a refrigerator shelf.

Vegetables with skins: Place in plastic bags or plastic container and store in crisper.

HIGH (closed) keeps moist air in the crisper for best storage of fresh, leafy vegetables.

Leafy vegetables: Wash in cold water, drain and trim or tear off bruised and discolored areas. Place in plastic bag or plastic container and store in crisper.

Meat Storage Guide

Store most meat in original wrapping as long as it is airtight and moisture-proof. Rewrap if necessary. See the following chart for storage times. When storing meat longer than the times given, freeze the meat.

Fresh fish

or shellfish

use same

day as purchased

Chicken,

ground beef, variety meats (liver)

1-2

days

Cold cuts,

steaks/roasts

3-5

days

Cured meats

7-10

days

Leftovers - Cover leftovers with plastic wrap, aluminum foil, or plastic containers with tight lids.

FREEZER FEATURES

Your model may have some or all of these features.

The ice service rack holds an ice cube tray.

To install and remove the ice rack:

1.Install the ice rack by sliding the L-shaped groove in the side of the shelf onto the wall screw. Push the rack toward the back. Then, lower the front of the rack onto the front screw.

2.Remove the ice rack by lifting the front of the rack from the front wall screw. Then, pull the rack forward and lift up to unhook it from the rear wall screw.

To remove and replace the snack drawer:

1.Pull drawer out to full extension. Tilt up front of drawer and pull straight out.

2.Replace the snack drawer by inserting the drawer into the frame rails and push the drawer back into place.

To remove and replace the freezer shelf:

1.Remove the shelf by pulling it out to full extension. Tilt up the front of the shelf and pull it straight out.

2.Replace the freezer shelf by inserting it into the freezer liner rails and push it to the back of the compartment.

11

Page 11
Image 11
Kenmore 596.6523*403 manual Freezer Features, To remove the crispers cover, To replace crispers cover, Meat Storage Guide