TYPICAL INSTALLATIONS / TOOLS AND MATERIALS NEEDED
FIG. 1
INSTALLATION ON COPPER PLUMBING USING COMPRESSION FITTINGS
apply several
wraps of
Teflon tape
optional shutoff valve
FILTERED
WATER
nut
brass
ferrule
compression adaptor
INLET |
|
|
3/4º NPT |
|
|
WATER |
| ± MATERIALS AND TOOLS NEEDED ± |
|
| |
IN |
| " 2 compression adaptors, 3/4º NPT x comp. |
|
| (compression end to fit existing copper pipe) |
|
| Note: Sears has an installation kit available that |
|
| fits 1/2º (5/8º O.D.) and 3/4º (7/8º O.D.) pipe |
|
| sizes, Item No. 42±34346. |
|
| " Teflon tape |
|
| " tubing cutter |
Note: Be sure to allow a minimum space of 1±1/2º | ↕ | " sandpaper or emery±cloth |
under the filter for removing the sump, to change the | " 2 wrenches, either open end or adjustable | |
cartridge. |
| jaw, size to fit compression adaptors |
FIG. 2 | SOLDERED COPPER INSTALLATION | |
(OBSERVE FIG. 1 NOTES) | ||
| ||
| adaptor, |
3/4º NPT x sweat
(apply several wraps of Teflon tape to threads)
IN | OUT |
WATER | ➠ |
IN ➠ | |
optional shutoff valve 3/4º copper |
|
pipe, as req'd. |
|
FIG. 4 UNDERSINK INSTALLATION
(FILTERING WATER TO 1 FAUCET)
OPTIONAL
mounting bracket,
Sears Item No.
SINK42±34348
± MATERIALS AND TOOLS NEEDED ± |
| ||
| (see page 6) |
| |
FIG. 3 | THREADED INSTALLATION | ||
(OBSERVE FIG. 1 NOTES) |
| ||
|
| ||
WATER |
| 3/4º hex nipple (2) | |
IN | OUT | ||
IN | |||
| ➠ | ||
➠ |
| ||
| 3/4º nipple |
|
hot
cold
shutoff valve
Note: To change the filter cartridge, you must turn off the water. A nearby shutoff valve is con- vienent. Most sinks already have shutoff valves on the supply pipes.
OPTIONAL installation kit, Sears Item No. 42±34347 (also see kit above)
optional shutoff valve | union fitting (2) |
3/4º pipe, as required
± MATERIALS AND TOOLS NEEDED ±(see page 7)
↕
Note: Be sure to allow a minimum space of 1±1/2º under the filter for removing the sump, to change the cartridge.
5