Kenmore 625.34847 Scton, Program, SET Water Hardness Number, Water Softener START-UP, Timer

S_CT_ON"_

I, _,,

10.PROGRAM

2.SET WATER HARDNESS NUMBER:

[] Press the SELECT button once to display t5 (flashing) and HARDNESS

The grains per gallon (gpg)

hardness of your water' supply is		d_w
on your water analysis report,	Be	HARONESS
sure to enter water test results	on

page 2, for future reference,

NOTE:

If your water supply contains iron, compensate for

it by adding to the water hardness number, For example, assume your water is 15 gpg hard and

contains .2 ppm iron, Add 5 to the hardness number for each I ppm of iron In thLs e_cample, you would use 25 for your hardness nzonber

15 gpg hardness

2 ppm iron x5 = 10 +10

(times) 25 HARDNESS NUMBER

[] Press the {_UP/DOWN []buttons to set your' water hardness number in the display, The DOWN button moves the display to 1, The UP button moves the display to the highest setting (see maximum setting for your' model in the specifications)

NOTE:

Each press of the UP/DOWN button changes the display by 1 between 1 and 25. Between 25 and the highest number, the display changes 5 at a time,.o25, 30, 35, etc. Continuous pressure on the

UP or DOWN button changes the display twice each second.

WATER SOFTENER START-UP

!

THE TIMER

3. SET RECHARGE (REGENERATION) TIME:

[] Press the SELECT button once to display 2:00 AM (flashing) and RECHARGE TIME

At the 2:00 AM RECHARGE TIME setting, the softener begins re-

generation (see pages 11 and 12) RECHARGE TIME ] at 2:00 AM, ending no later than

4:00 AM, This is a good time in most households because water

is not being used (see AUTO- MATIC BYPASS, page 13)

If a different RECHARGE TIME setting would be better for your household, do the following.

[] Press the [] UP/DOWN [] buttons to set the desired RECHARGE starting hour. Be sure to observe the AM-PM as you did when setting the time of day.

NOTE:

Each press of the UP/DOWN buttons changes the display 1 hour,. Continuous pressure on the UP or

DOWN button changes the display twice each second.

[] Press the SELECT button once again, to return the present time (steady) of day and RECHARGE TONIGHT in the display

" {F2.,I

RECHARGE

IF YOU NEED HELP PROGRAMMING THE TIMER, CAH_, TOLL FREE, NUMBER 1-800- 426- 9345

SEE PAGE 10 FOR OTHER FACE PLATE TIMER FEATURES,