PARTS OF THE SYSTEM
filter system assembly including mounting brack- et and screws
water supply fitting
_" filtered water faucet for sink or countertop mount- ing
3/8" tubing to make all needed connections
MATERIALS AND TOOLS NEEDED
• plumbers putty
• slotted and Phillips screwdrivers
•pliers and adjustable jaw wrench
•tubing cutter
•sandpaper or emery cloth
•electric driU and 3 / 4" d_l bit if mounting hole is needed for the faucet, see page 6
CAUTION: To avoid damaging the sink, consult a
qualified plumber or installer for dialing procedures
in porcelain or stainless steel.
TYPICAL UNDERSINK INSTALLATION
FIG. 1
shutoff valve
Note: To change the fil- ter cartridge, you must turn off the water and re- tease pressure by open- ing the faucet. A nearby shutoff valve is conve* nient. Most sinks al-
ready have shutoff
valves on the supply pipes.
faucet
filtered water
supply fitting
\
\
WATER
IN
mounting screw (2)
\
$
Filter I
Filter II
Note: Be sure to allowa minimumspaceof
4
