Kenmore 625.38556 owner manual Osmosis

Unpack and			Check		Shipment			......................................................................			4
What	Your		Reverse		Osmosis		System		Will	do	5
Plan	Your	Installation				...........................................................................					5-6
Overview		and		Site	Preparation			.....................................................................			7
Step	I-Install		Supply			Water	Fitting				8
Step	2-Install			Reverse		Osmosis		Drain	..............................................................		9-10
Step	3-Install			Reverse		Osmosis		Filter	Assembly		11
Step	4-Install			Storage		Tank	........................................................................				11
Step	5-Install			Reverse		Osmosis		Faucet			12-13
Step	6-Connect			Tubes							14-15
Step	7-Sanitize,			Pressure Test, Purge					System		16-17
How	Your	Reverse			Osmosis		Water System			Works	18-19
Maintenance				................................................................................							20-21
Specifications				..................................................................................							22
Troubleshooting				.............................................................................							24-25
Exploded		View & Parts List					....................................................................				26-27

•Read all steps and guides carefully before installing and using your reverse osmosis system. Follow all steps

exactly to correctly install. Reading this manual will also help you to get all the benefits from the reverse osmosis system.

•Do not attempt to use this product to make safe drink- ing water from non-potable water sources. Do not use

the system on microbiologically unsafe water, or water of unknown quality without adequate disinfection before or after the system. This system is certified for cyst reduction and may be used on disinfected water that may contain filterable cysts.

•Check with your local public works department for plumbing and sanitation codes. You must follow their guides as you install the system. Follow your local codes if they differ with guides in this manual.

•This system shall only be used for arsenic reduction on chlorinated water supplies containing detectable resid- ual free chlorine at the system inlet. Water systems using an inline chlorinator should provide a one minute chlorine contact time before the RO system.

This system is acceptable for treatment of influent con- centrations of no more than 27 mg/L nitrate and 3

mg/L nitrite in combination measured as N and is cer-

tified for nitrate/nitrite reduction only for water sup- plies with a pressure of 280 kPa (40 psig) or greater.

•The reverse osmosis system works on water pressures of 40 psi (minimum) to 100 psi (maximum). If your house

water pressure is over the maximum, install a pressure reducing valve in the water supply pipe to the reverse osmosis system.

Do not install the reverse osmosis system outside, or in extreme hot or cold temperatures. Temperature of the water supply to the reverse osmosis system must be between 40°F and IO0°F. Do not install on hot water.

•Read the other limits (pH, hardness, etc.) in the specifi- cations and be sure your water supply conforms.

•The reverse osmosis membrane contains a preservative

for storage and shipment. Be sure to purge as instruct- ed on page 17 before using product water.

Questions? Call The Kenmore Water Line 1-800-426-9345 or visit KenmoreWater.com

3