CHOOSE TYPE OF WATER FITTING TO INSTALL

Check and comply with local plumbing codes as you plan, then install a cold feed (supply) water fitting. Refer to the Specifications page for supply water requirements. The fitting must provide a leak-tight connection to the RO 1/4" tubing. A typical connection using the included water supply fitting is shown in Figure 5.. An optional connection using standard plumbing fittings (not included) is shown in Figure 5B.

NOTE: Local code may dictate which type of water fit- ting is used. Consult a plumber if you are not familiar with local codes or plumbing procedures.

NOTE: Codes in the state of Massachusetts require installation by a licensed plumber and do not permit the use of saddle valves.

If you live in the state of Massachusetts, review plumb-

ing code 248-CMR of the Commonwealth of Massachusetts before proceeding with the installation.

INSTALL COLD WATER SUPPLY FITTING

(Included with your package)

This fitting will be installed on the cold water pipe. The fitting must provide a leak-tight connection to the Reverse Osmosis 1/4" tubing. Locate the cold water line in the

sink cabinet. It is recommended, but not required, that the cold water line be soft water.

Complete the following steps to install the water supply fitting.

1.Close the water shut off valve that is immediately before supply fitting and open faucets to drain water from the sink cold water pipe.

2.Remove nut that connects the cold water faucet to cold water plumbing.

3.Thread water supply fitting onto pipe and reconnect nut to bottom of fitting.

OPTIONAL PIPE FITTINGS

(compression type shown)

Shutoff

Valve

 

Shutoff

Valve

 

 

 

 

,.

.

_1

I

 

water

supply

fitting

 

faucetc°la waterstud

/

•_J _

 

(tee,

feed

adaptor)

 

thread

sealing

 

 

 

 

 

 

 

tape on threads 7__

 

 

 

 

 

 

 

 

pipe

 

_

 

Reverse

Osmosis

inlet

cold water .

 

_i/4"

green

tubing

to

Cold

Water Supply

Connection

 

 

 

(using

included

water

supply

fitting)

 

Figure 5

Hot

Water

Cold

Water

Shutoff

Valve m

Shutoff

Valve

 

I

 

 

 

 

1/4"

compression

 

j

fitting

 

 

 

insert

NOTE: Be sure to turn off the water supply and open a

faucet to drain the pipe.

f

cold water

ferrule

Complying with plumbing codes, install a fitting on the cold water pipe to adapt 1/4" OD tubing. A typical con- nection is shown in Figure 5B. If threaded fittings are used, be sure to use pipe joint compound or thread seal- ing tape on outside threads.

pipe

1/4" green

 

tubing

to Reverse

 

Osmosis

inlet

Cold Water Supply Connection

(using compression fitting - not included) Figure 5B

Questions? Call The Kenmore Water Line 1-800-426-9345 or visit KenmoreWater.com

Page 8
Image 8
Kenmore 625.38556 Choose Type of Water Fitting to Install, Install Cold Water Supply Fitting, Optional Pipe Fittings

625.38556 specifications

The Kenmore 625.38556 is a highly efficient and versatile air purifier designed to enhance indoor air quality. With its modern design and well-thought-out features, this model is ideal for those looking to combat allergens, dust, odors, and other airborne irritants in their living spaces.

One of the standout features of the Kenmore 625.38556 is its advanced filtration system, which includes a True HEPA filter. This type of filter is capable of capturing 99.97% of particles as small as 0.3 microns, making it highly effective against pollen, mold spores, pet dander, and smoke. The air purifier also features a pre-filter that captures larger particles, prolonging the life of the HEPA filter and ensuring optimal performance.

To further enhance its functionality, the Kenmore 625.38556 is equipped with an activated carbon filter. This filter effectively absorbs odors, including those from pets, cooking, and smoke, ensuring that the air remains fresh and clean. Combined with the HEPA filtration system, this air purifier excels in creating a healthier indoor environment.

In terms of user convenience, the Kenmore 625.38556 boasts a range of operating modes. It comes with multiple fan speeds, allowing users to customize airflow based on their current needs. The quiet operation is a significant advantage, making it suitable for use in bedrooms, nurseries, or offices without causing disturbances.

Additionally, the air purifier features a built-in air quality indicator, which changes color based on the detected air quality. This real-time feedback allows users to easily ascertain when the air in their space is clean or in need of purification.

Another thoughtful characteristic is its filter replacement indicator, which alerts users when it’s time to change the filters. This ensures that the air purifier maintains its high performance over time without unexpected lapses in filtration efficacy.

With its stylish design and compact size, the Kenmore 625.38556 can fit seamlessly into any room decor, making it a practical and attractive addition to a home. Whether you are dealing with common allergens or simply want to improve your indoor air quality, the Kenmore 625.38556 is a reliable choice that combines efficiency, technology, and aesthetics into one exceptional product.