To remove the Large Object Trap/ Cylinder Filter Assembly:
1.Remove the bottom rack.
2.Grasp the assembly and turn it counterclockwise ¼ turn as shown below.
3.Lift out the assembly as shown below.
4.Carefully examine the assembly. If you find debris in the Large Object Trap, turn it
5.Flush the Cylinder Filter clean by holding it under running water.
To remove the fine filter:
1.Lift the fine filter from the dishwasher floor as shown above and flush it clean by holding it under running water.
2.Remove the Micro filter and flush it clean by holding it under running water.
Fine 
Filter
To reinstall the filter system:
1.Return the fine filter to its originally installed position.
2.Place the Large Object Trap/Cylinder Filter Assembly into its installed position in the dishwasher floor.
3.Turn the ring handle clockwise 1/4 turn until it is locked. The arrow on the ring handle and the arrow on the Fine Filter should point to each other, as shown below.
4.Gently pull the ring handle to ensure that the assembly is locked into place.
•Clean the Exterior Door Panel Colored Doors
Use only a soft cloth that is lightly dampened with soapy water.
Stainless Steel Doors
Use a soft cloth with a
•Clean the Door Gasket
Regularly clean the door gasket with a damp cloth to remove food particles and other debris. Also clean the door seal, located inside the dishwasher at the bottom of the door.
•Winterizing Your Dishwasher
If your dishwasher will be unused for an extended period of time in a location that experiences freezing temperatures (e.g., in a holiday home or through a vacation period), have your dishwasher winterized by an qualified service center.
16
