DIAGNOSTIC CHECKLIST
Should you ever haveany questions or concerns about the operation of your Kenmore Air Cleaning System, you may want to check this chart first. If the problem persists, call
our Help Line.
ConditionCheckpoints
Unit won't come on Make sure that the power cord is plugged in
Set the Rota_ Switch to the desired speed
Make sure"ihat the Front Access
Panel is properly installed
.....
*"Makesure Forever Filter" is properly installed
,,,,,, ,,,,
Unit does not operate on Low (1) Speed
,,,,,
Run on High (3) for two minutes then reset to Low (1) Speed
,,,,,,,,,,,
Unit does not remove pollutants
,,,,,,
unit snaps or pops
Wash Forever.Filter"
Wash the Forever Filter" and make sure that it is thoroughly dry
Make sure ionizing wire'sin Forever Filter" are not broken
,,, ,,,,,,,,,,,,
Check for bent plates in Forever Filter" - straighten if possible
Check for large particles such as hair or lint on ionizing wires; Remove if possible
,,,, ,,,,,,,,
Interference with Radio and "PC
Move unit to a different location away
from TV or Radio. Do not operate unit on the same electrical outlet as
TV or Radio
Clean Forever Filter" if dirty
, ,, ,,,,,,,, | ..... | ,, |
Unit does not operate Call Help Line/Have unit serviced properly
