Filter Removal Instructions
1.Turn the Upper Filter Assembly 1Aturn counterclockwise and lift out.
2.Grasp the Lower Filter in the circular opening, lift slightly, and pull forward to remove.
3.Clean the filters as shown below.
To remove Upper Filter Assembly
Cleaning Instructions
IMPORTANT:
Do not use wire brush, scouring pad, etc. as they may damage the filters.
Rinse filter under running water until most soils are removed. If you have
Filter Reinstallation Instructions
1.Noting the previous illustrations, place the Lower Filter under the Locating Tabs in the bottom of the dishwasher so the round opening for the Upper Filter Assembly lines up with the round opening in the bottom of the tub.
2.Insert the Upper Filter Assembly into the circular opening in the Lower Filter.
3.Slowly rotate the filter clockwise until it drops into place. Continue to rotate until the filter is locked into place. If the filter is not fully seated (still turns freely), continue to turn the filter clockwise until it drops and locks into place.
NOTE: The Upper Filter Assembly arrow does not have to align with the arrow in the Lower Filter as long as the filter is locked.
J
/
To replace Upper Filter Assembly
IMPORTANT:
To avoid damage to dishwasher, do not operate your dishwasher without the ULTRA WASH ®HE filters properly installed. Be sure the Lower Filter is securely in place and the Upper Filter Assembly is locked into place. If the Upper Filter Assembly turns freely, it is not locked into place.
Hot water dissolves and activates the dishwasher detergent. Hot water also dissolves grease on dishes and helps glasses dry
Additional efficiency tips
•To save water, energy and time, only scrape dishes. Do not rinse dishes before putting them into the dishwasher.
•Use a delay feature to run your dishwasher during
•During the summer, run your dishwasher at night. This reduces daytime heat buildup in the kitchen.
•Use a rinse aid to improve drying.
