Soil SettlerSoil Removal System
The Soil Settler soil removal system cleans by spraying a mixture of hot, clean water and detergent against soiled dishes.
3.Remove collected particles from the screen with your fingers or a paper towel.
To clean the Soil Settler filter screen
1. Wait at least 20 minutes after a cycle for the heating element to cool down.
2. Unload and slide the bottom rack forward. (Remove bottom rack if necessary to reach filter screen.)
4. Replace the bottom rack with the rack bumpers facing the door.
NOTE: Do not clean the dishwasher interior until it has cooled.
START-UP GUIDE
Before using your dishwasher, remove all packaging materials. Read this entire Use and Care Guide. You will find important safety information and useful operating tips.
Using Your New Dishwasher
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
A power supply of 120 volts, 60 Hz AC, 15 or 20 amps, is required.
1.Plug into a grounded 3 prong outlet.
2.Rinse aid is essential for good drying. Be sure to fill the dispenser before you use your new dishwasher. Each filling will last about 1 to 3 months depending on your usage.
3.Scrape large food soil and hard items (toothpicks or bones) from dishes.
4.Properly load the dishwasher. (See “Dishwasher Loading.”) Load dishes with space in between so water will reach the soiled surfaces. Make sure nothing keeps the spray arm(s) from spinning freely.
5.Add detergent. Always use a quality brand detergent. (See “Dishwasher Use.”)
6.Push door firmly closed. The door latches automatically. Run hot water at the sink where you will connect dishwasher until water is hot. (See “Dishwasher Efficiency Tips.”) Turn off the water and hook the dishwasher to the faucet. (See “Connecting the Dishwasher.”) Turn on the hot water.
7.Press the desired cycle and option selections. (See
“Dishwasher Use.”) Turn the Cycle Control knob to the desired cycle to start.
7
