Kenmore 665.1776 Canceling a Cycle, Changing a Cycle or Setting, Adding Items During a Cycle

Light Wash

Use this cycle for china and crystal. This cycle uses a light wash and gentle dry. During the heated dry, the heating element cycles on and off.

Use covered detergent dispenser section.

Wash	Main	Rinse or	Final	Dry	Approximate	Water
	Wash	Purge	Rinse		Time	Usage
						(gal/L)
	●	●	●	●	1.5 hrs*	4.8/18.2
		Purge		cycled

Quick Rinse

Use this rinse cycle for rinsing dishes, glasses, and silverware that will not be washed right away.

Do not use detergent with this cycle.

Wash	Main	Rinse or	Final	Dry	Time	Water
	Wash	Purge	Rinse		(min)	Usage
						(gal/L)
		●			10	2.2/8.3
		Rinse

*If the incoming water temperature is less than the recommended temperature, the cycle will automatically compensate by adding time and heat as needed.

Canceling a Cycle

1.Press CANCEL/DRAIN. The Cancel/Drain light glows.

2.The dishwasher starts a 2-minute drain (if needed). Let the dishwasher drain completely. The light turns off after

2 minutes. The door must be closed for the dishwasher to drain.

To stop the drain

You can press CANCEL/DRAIN again to stop the drain. Remember to drain the dishwasher before starting a new cycle.

To clear the indicators

Press CANCEL/DRAIN before starting the dishwasher to clear all options and cycles.

Changing a Cycle or Setting

During the first minute of a cycle

1.Select a new cycle and/or options.

2.Check the detergent dispensers. They must be filled properly for the new cycle.

3.The Start/Resume light will flash when the door is opened. Make sure the door is closed.

4.Press START/RESUME.

After the first minute of a cycle

1.Press CANCEL/DRAIN. The Cancel/Drain light glows. Your dishwasher starts a 2-minute drain (if needed). Let the dishwasher drain completely.

2.Check the detergent dispensers. They must be filled properly for the new cycle.

3.Make sure the door is closed. The Start/Resume light will flash.

4.Select a new cycle and/or options.

5.Press START/RESUME.

Adding Items During a Cycle

You can add an item anytime before the main wash starts. Open the door and check the detergent dispenser. If the cover is still closed, you can add items.

To add items

1.Open the door slightly to stop the cycle. Wait for the spraying action to stop before opening the door. The Start/Resume light will flash.

2.Open the door. If the detergent dispenser cover is still closed, add the item.

3.Close the door firmly until it latches. The Start/Resume light will flash.

4.Press START/RESUME.

IMPORTANT: If Lock On is selected, turn off the lock (see Lock On section in “Option Selections”), or the Start/Resume light will continue to flash.

Option Selections

You can customize your cycles by pressing an option. If you change your mind, press the option again to turn off the option. Select a different option if desired.

You can change an option anytime before the selected option begins. For example, you can press an unheated drying option anytime before drying begins.

Press START/RESUME to use the same cycle and option(s) as the previous wash cycle.

NOTE: If the last cycle you completed was a rinse cycle, when you press START/RESUME, the dishwasher runs the last full wash cycle and options.

14