Kenmore 665.1776 Dishwasher Loading, Using the Faucet, Loading Suggestions, Quiet operating tips

Models: 665.1776

1 60
Download 60 pages 34.86 Kb
Page 9
Image 9

Using the Faucet

Disconnecting the Dishwasher

You can draw water from the faucet while the dishwasher is connected.

NOTE: Do not draw water while the dishwasher is filling or while water is being pumped out. (This helps avoid a low fill when dishwasher is filling or mixing drain water with fresh water when dishwasher is draining.)

Press the red button on the hose connector to draw water from the faucet. (The faucet is set on hot. Adjust the faucet for the water temperature you want.)

NOTE: Turn the hot water back on after you draw water from the faucet. Turn off the cold water.

1.Turn off the hot water. (This can be done after the last rinse.)

2.Press the red button on the connector to release the water pressure.

A

B

C

D

A. Faucet adapter

B. Locking collar

C. Red button

D. Hose connector

3.Lift slightly on the hose connector while pulling down the locking collar. Pull down on the connector.

4.Empty any remaining water from the connector by turning the connector upside-down.

5.Unplug the power supply cord and return it to the storage compartment.

6.Return the hoses to the storage compartment.

DISHWASHER LOADING

Loading Suggestions

Remove leftover food, bones, toothpicks and other hard items from the dishes. To conserve water and energy and save time, it is not necessary to rinse dishes before putting them into the dishwasher.

NOTE: Prerinsing dishes soiled with tomato-based products is recommended to avoid staining the dishware.

The wash module removes food particles from the water. The module contains a multilevel wash system with a self-cleaning filter.

NOTE: If hard items such as fruit seeds, nuts, and eggshells enter the wash module, you might hear grinding, crunching, or buzzing sounds. These sounds are normal when hard items enter the module. Do not let metallic items (such as pot handle screws) get into the wash module. Damage can occur.

For best drying, water must be able to drain from all surfaces.

It is important for the water spray to reach all soiled surfaces.

Load dishes so they are not stacked or overlapping if possible.

Use special care when loading heavy pots and pans. Heavy items can damage the interior of the door if they are dropped or bumped.

Make sure pot lids and handles, pizza pans, cookie sheets, etc., do not interfere with the spray arm rotation.

Conserve water and energy and save time over hand rinsing by running a rinse cycle to keep dishes moist if you do not plan to wash them soon. Foods such as eggs, rice, pasta, spinach, and cooked cereals may be hard to remove if they are left to dry over a period of time.

Place items so open ends face down for best cleaning and draining.

Quiet operating tips

To avoid thumping/clattering noises during operation:

Make sure lightweight load items are secured in the racks.

Make sure pot lids and handles, pizza pans, cookie sheets, etc., do not touch interior walls or interfere with the rotation of the spray arm(s).

Load dishes so they do not touch one another.

9

Page 9
Image 9
Kenmore 665.1776 manual Dishwasher Loading, Using the Faucet, Loading Suggestions, Disconnecting the Dishwasher