Allow main and screen filter to dry 24 hours before putting them back. Make sure that the filters dry completely.
When cleaning the main filter no longer restores vacuum suction to full power, you need to replace the main filter.
TO CHANGE THE EXHAUST FILTER, take it
out of cleaner and replace it with new one.
DO NOT CLEAN WITH WATER OR LIQUID. This filter can not be cleaned and must be
replaced for proper performance.
CAUTION
Wet filter can cause permanent damage to cleaner.
Ensure that all filters dry completely.
Make sure that the cleaner's switch is off and disconnect the power cord.
Remove two screws and light cover.
Remove the bulb by twisting and pushing it in slightly; Then pull out.
Replace the bulb by pushing the bulb in.
WARNING
Personal injury hazard
To avoid personal injury, switch off and disconnect the power cord.
