Kenmore 790.4019 manual Oven Vent and Racks, Oven Vent Location, Arranging Oven Racks

Oven Vent and Racks

Oven Vent

Location

Some models are equipped and self-cleaningmode to keep all internal The blower may keep running even if the components have cooled down.

with a blower which runs in baking components at a cool temperature. oven has been turned off, until the

Oven Vent Location

The oven is vented at the center trim. When the oven is on, warm air is released through the vent. This venting is necessary for proper air circulation in the oven and good baking results.

Arranging Oven Racks

ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN !S COOL (PRIOR TO

OPERATING THE OVEN), Always use oven mitts when using the oven.

To remove an oven rack, pull the rack forward until it stops. Lift up front of rack and slide out.

To replace an oven rack, fit the rack onto the guides on the oven walls. Tilt the front of the rack upward and slide the rack back into place.

Air Circulation in the Oven

If using 1 rack, place in center of oven. If using multiple racks, stagger cookware as shown.

For best air circulation and baking results allow 2-4" (5-10 cm) around the	1 Oven Rack
cookware for proper air circulation and be sure pans and cookware do not
touch each other, the oven door, sides or back of the oven cavity. The hot air
must circulate around the pans and cookware in the oven for even heat to
reach around the food.

Multiple Oven Racks