Kenmore 790.42003 manual Oven Vent and Racks, Arranging Oven Racks, Oven Ladder Racks

Oven Vent and Racks

UpperOven Vent Location

This model is equipped with a blower which runs in baking and

self-cleaning mode to keep all internal components at a cool temperature. The blower may keep running even if the oven has been turned off, until the components have cooled down. in self=clean mode, the blower in both ovens will start when using one of the ovens.

Oven Vent Location

The oven is vented through the center trim of both ovens. When the oven is on, warm air is released through the vent. This venting is necessary for proper air circulation in the oven and good baking results.

Arranging Oven Racks

ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL (PRIOR TO

OPERATING THE OVEN). Always use oven mitts when the oven is in use.

To remove an oven rack, pul the rack forward.

To replace an oven rack, fit the rack onto the guides of the oven ladder racks. Tilt the front of the rack upward and slide the rack back into place.

@

LowerOven

Vent Location

1 Oven Rack

Air Circulation in the Oven

if using 1 rack, place in center of oven. if using multiple racks, stagger cookware as shown.

For best air circulation and baking results allow 2-4" (5-10 cm) around the cookware for proper air circulation and be sure pans and cookware do not touch each other, the oven door, sides or back of the oven cavity. The hot air must circulate around the pans and cookware in the oven for even heat to reach around the food.

@

Multiple Oven Racks

Oven Ladder Racks

This appliance is equipped with an oven ladder rack system which allows oven racks to be placed in multiple positions. This system also eases the removal of oven racks and will give you more precise control of the desired baking results.

ONLY REMOVE LADDER RACKS WHEN THE OVEN IS COOL (PRIOR

TO A SELF CLEAN OPERA TION). Always use oven mitts when the oven

is in use. _

]::t

Q:,)

j_

Ladder Rack Positions

To remove an oven ladder rack, pull the rack upward and remove it from the guides in the oven cavity.

To replace an oven ladder rack, fit the rack onto the guides of the oven cavity and push downward.

Ladder

Rack

Removal

j

Ladder Rack

Replacement