Setting Oven Controls (cont'd)
Note: The time of day must first be set in order to operate the oven.
To Set the MinuteTimer:
1.Press @.
2.Press the A to increase the time in one minute increments. Press and hold the A to increase the time in 10 minute increments. The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes.
Note: If you press the v pad first, the timer will advance to 11 hours and 59 minutes.
3.The display shows the timer count down in minutes until one minute remains. Then the display will count down in seconds.
4.When the set time has run out, the timer will sound a 3 seconds beep. Then 0:00 will appear in the display until is pressed.
Note: While the minute timer is counting down, the ":" will flash. The minute timer does not start or stop cooking. It serves as an extra timer in the kitchen that will beep when the set time has run out. The minute timer can be used alone or during any of the other oven functions. When the minute timer is in use with any other function, the minute timer will be shown in the display. To view other functions, press the pad for that function.
To Change the Minute Timer while it is in use:
While the timer is active and shows in the display, press and hold the A or V pad to increase or decrease the time.
iii:Si_
To Cancel the Minute Timer before the set time has run out: Press _.
To Set or Change the Temperature for Baking
The oven can be programmed to bake at any temperature from 170°F to 500°F.
To Set the Controls for Baking:
1. Press 0' " | "appears in the display. |
d
2.Within 5 seconds, press the A or V. The display will show "350 °''By. pressing and holding the A or v, the temperature can then be adjusted in 5°F increments.
3.When the A or V is released, the oven will begin heating to the selected temperature. When the oven temperature reaches the desired baking temperature, the control will beep one (1) time.
4.To cancel the baking function, press _.
To Change the Oven Temperature after Baking has Started:
1. Press , and make sure the bake temperature is displayed.
2. Press the A or V to increase or decrease the set temperature.
11
