(A, upperoven,someoweroven)

What to Expect during Cleaning:

While the oven is in operation, the oven heats to temperatures much higher than those used in normal cooking. Sounds of metal expansion and contraction are normal. Odor is also normal as the food soil is being removed. Smoke may appear through the oven vent.

If heavy spillovers are not wiped up before cleaning, they may flame and cause more smoke and odor than usual. This is normal and safe and should not cause

alarm. If available, use an exhaust fan during the self-cleaning cycle.

Self-Clean Cycle time length

For satisfactory results, use a 2 hour Self-Clean cycle for light soils and a 3 hour cycle for average or a 4 hour cycle for heavy soils. NOTE: The kitchen area should be well ventilated using an open window, ventilation fan or exhaust hood during the Self-Clean cycle. This will help eliminate the normal odors associated with the Self-Clean cycle.

To avoid possible

burns use care when opening the oven door after the Self-Cleaning cycle. Stand to the side of the oven when opening the door to allow hot air or steam to escape.

DO NOT force the

oven door open. This can damage the automatic door locking system, Use caution and avoid possible burns when opening the door after the Self-Cleaning cycle has

completed, The oven may still be

VERY HOT.

To Set the Controls for a Self-Clean Cycle or a Delayed Start Self-Clean Cycle:

(Note: If you do not want to start a Delayed Self-Clean Cycle, skip steps 2 & 3.)

1.Be sure that the clock is set with the correct time of day and the oven door is closed.

2.Press _. "DELAY" will flash.

3.Press and hold the A pad to scroll to the time to start the delayed Self-Clean cycle. Release the pad when the desired time is displayed.

4.

Press

_I_. "

" appears in the display.

 

 

 

 

v

 

 

 

 

5.

Press

thej_or

Vonce.

"3:00" appears in the display

for a 3 hour cycle. To change to a 2 hour cycle press v.

 

"2:00"

appears

in the display or to select a 4 hour cycle

press j_.

"4:00" appears in the display.

 

As soon as the controls are set, the motor driven lock will begin to close automatically and the "DOOR LOCKED"

 

indicator light will appear. DO NOT open the oven door while the light is flashing (it takes about 15 seconds for the

 

oven door to lock).

 

 

 

6."CLn" will appear in the display during the Self-Clean cycle and the "DOOR LOCKED" light will glow until the Self- Cleaning cycle is complete or cancelled and the oven temperature has cooled.

When the Self=Clean Cycle is Completed:

1.The time of day or "End" will appear in the display window and the "Clean" and "DOOR LOCKED" light will continue to glow.

2.Once the oven has cooled down for about 1 HOUR and the "DOOR LOCKED" light has gone out, the oven door can be opened.

3. If "End" is in the display and the Select Clean indicator light remains ON, press

). The time of day will appear in

the display.

NOTE: When the oven is cool, wipe away any residue or powdered ash with a damp cloth or paper towel.

Stopping or Interrupting a Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a Self-Cleaning cycle:

1.Press _.

2.Once the oven has cooled down for about 1 HOUR and the "DOOR LOCKED" light has gone out, the oven door can be opened.

3.Restart the Self-Clean cycle once all conditions have been corrected.

18

Page 18
Image 18
Kenmore 790.4776, 790.4787, 790.4777 Upperoven,someoweroven, What to Expect during Cleaning, Self-Clean Cycle time length