Setting Oven Controls

Note: The time of day must first be set in order to operate the oven.

NOTICE : The illustrations and instructions contained in this document only refer to the upper oven operations. Before every operations, you must select the proper oven which will be in use. All these instructions can also be applied to the lower oven by selecting the Lower Oven Pad on the right hand side of the control panel.

To Set or Change the Temperature

for Baking

The

pad controls normal baking. The oven

can be programmed to bake at any temperature from 170° F to 550 ° F.

To Set the Controls for Normal Baking:

 

 

1.

Arrange interior oven racks and place food in oven.

2.

Press

pad, "- - -" will appear, "UPPER"

or "LOWER" and "BAKE" will flash in the display.

3.Press A or V pad to set the desired temperature. The desired temperature will appear "UPPER" or "LOWER" and "BAKE" continue flashing in the display.

4.Wait 5 seconds. "UPPER" or "LOWER" and "BAKE" stop flashing and the oven icon will appear in the display. A beep will sound once the oven temperature reaches the desired baking temperature.

Pressing

pad will cancel the Bake feature at any time.

To Change the Oven Temperature after Baking has Started:

1. After the oven has already been set to bake and the oven temperature needs to be changed, press

pad. "- - -

o,,

will appear, "UPPER" or "LOWER" and "BAKE" start flashing in the display.

2.Press ,j_ or V pad to increase or decrease the set temperature.

3.Wait 5 seconds. "UPPER" or "LOWER" and "BAKE" will stop flashing and remain in the display. A beep will sound once the oven temperature reaches the desired baking temperature.

Note: If the oven was recently heated from prior cooking and has remained heated, the bake element symbol may not show in the display immediately.

To Set Control for Continuous Bake or 12 Hour Energy Saving:

The _ pad controls the Continuous Bake or 12 Hour Energy Saving Features. The oven control has a factory preset

V

built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous Baking.

To set control for continuous baking:

1. Press and hold _

pad for 10 seconds. After 10 seconds "12h" or "- -h"'will appear in the display and the control will beep once.

2.Press A or V pad to switch between the 12 Hour Energy Saving and continuous bake features. Note: "12h" in the display indicates the control is set for the 12 Hour Energy Saving mode and "- -h" indicates the control is set for the Continuous Bake feature.

3.Wait 5 seconds to accept the change (display will return to time of day) or press (_ pad to reject the change.

To Set Control for Oven Lockout (some models):

The _ pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven doors and

prevents the Oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights. The ovens can be locked individually.

To activate the Oven Lockout feature

Press and hold _ pad for 3 seconds. After 3 seconds a beep will sound, "DOOR", "LOCKED'"will flash and "Loc", the

oven icon, "UPPER" and _ will appear in the display. Once the oven door is locked the "DOOR" and "LOCKED'"indicator will stop flashing and remain in the display.

To reactivate normal oven operation:

Press and hold _

pad for 3 seconds. A beep will sound. The oven icon, "UPPER'","LOC" and _ will disappear from the

display. "DOOR'"and "LOCKED" will flash in the display until the oven door has completely unlocked. The wall oven is again fully operational. Note: Because you can set the oven lockout individually, the lower oven can be used when the upper oven lockout feature is on.

10

Page 10
Image 10
Kenmore 790.4776, 790.4787, 790.4777, 790.4773 manual Setting Oven Controls, To Set or Change the Temperature For Baking