General Care & Cleaning (cont'd)

Cleaning the ContouredWell Areas, Burner Cap, Burner Head and Burner Drip Pans (some models)

The contoured well areas, burner cap, burner head and burner drip pans (some models) should be routinely cleaned. Keeping the burner ports clean will prevent improper ignition and an uneven flame. Refer to the following instructions:

•

_

Surface

_11_,_

(l_t_

Burner

Cap

Surface

Burner

Head

To Clean the Recessed and Contoured Areas of the Cooktop - tf a spill occurs on or in the recessed or contoured areas, blot up spill with an absorbent cloth. Rinse with a clean, damp cloth and wipe dry.

To Remove and Replace the Surface Burner Caps and Surface Burner Heads

-Remove in the following order: (1st) surface burner grate, (2nd) surface burner cap, (3rd) surface burner head and (4th) surface burner drip pan (if equipped).

Reverse the procedure above to replace the surface burner cap, surface burner head and surface burner drip pans (if equipped). Do not remove any parts from the cooktop until they have completely cooled and are safe to handle. Do not

operate the surface burners without the surface burner cap and surface burner head properly in place.

/Orifice

Holder,

Removable

Burner

Drip Pan (on some models)

To Clean the Surface Burner Cap, Surface Burner Head and Surface Burner Drip Pan (if equipped) - Use a soap-filled scouring pad or a mild abrasive cleanser to clean the surface burner caps, surface burner heads and surface burner drip pans (if equipped). The ports (or slots) around the burner head must be routinely cleaned. If residue still remains in these ports, use a small-gauge wire or needle to clean the slots or holes. For proper flow of gas and ignition of the burner--DO NOT ALLOW SPILLS, FOOD, CLEANING AGENTS OR ANY OTHER MATERIAL TO ENTER THE GAS ORIFICE HOLDER OPENING. ALWAYS keep the surface burner cap and surface burner head in place whenever a surface burner is in use.

Adjusting the Oven Temperature

Your oven control has been precisely set at the factory. This setting may differ from your previous oven however, so your recipe times may not give you the results you expect. If you think that the oven is cooking too hot or too cool for your recipe times, you can adjust the control so that the oven cooks hotter or cooler than the temperature displayed.

To Adjust Oven Temperature:

1.Press Bake.

2.Set the temperature to 550°F (287°C) by pressing and holding the J%.

Within 2 seconds, press and hold _Bake until the 2 digit display appears. Release _. The display now indicates the amount

of degrees offset between the original factory temperature setting and the current temperature setting. If the oven control has the original factory calibration, the display will read "0."

4.Thetemperaturecann_wbeadjustedup_rd_wn35°F(17°c),in5°Fstepsbypressingandh__dingtheJ% or V. Adjust

until the desired amount of offset appears in the display. When lowering the oven temperature, a minus sign (-) will appear before the number to indicate that the oven will be cooler by the displayed amount of degrees.

5.When you have made the desired adjustment, press _ to go back to the time of day display.

Note: Oven temperature adjustments made will not change the Self-Cleaning feature temperature.

18

Page 17 Page 19
Page 18
Image 18
Kenmore 790.7859, 790.7858, 790.7861, 790.7857, 790.7851 manual General Care & Cleaning contd, Adjusting the Oven Temperature
Page 17 Page 19

790.7853, 790.7852, 790.7862, 790.7863, 790.7851 specifications

The Kenmore 790 series, including models 790.7859, 790.7858, 790.7861, 790.7857, and 790.7851, represents a noteworthy selection of ranges designed to meet the needs of modern cooks. Each model offers unique features and advanced technologies that enhance cooking efficiency and convenience.

One of the standout features across the Kenmore 790 series is their powerful cooking performance. These ranges are equipped with high-performance burners that deliver quick heat-up times and precise temperature control. For instance, the models often include a powerful simmer burner, perfect for sauces and delicate dishes, alongside high-output burners for searing and sautéing.

In addition to impressive burners, the baking performance of the Kenmore 790 series is equally commendable. Many models feature advanced convection cooking technology, which utilizes a fan to circulate hot air evenly throughout the oven cavity. This results in consistent baking results, reducing cooking times and ensuring perfectly baked goods every time.

The Kenmore 790 range series also emphasizes user-friendly features. Most models come equipped with a digital control panel that simplifies the process of selecting cooking settings. Some models boast Wi-Fi connectivity, allowing users to control their oven remotely through a mobile app. This technology lets home chefs preheat their ovens or adjust cooking temperatures from anywhere in the house.

Cleaning is made effortless with self-cleaning options available in many of the 790 series models. The self-cleaning feature utilizes high temperatures to burn off food residue and spills, minimizing the need for scrubbing and harsh chemicals.

Moreover, the aesthetic design of the Kenmore 790 series ranges combines functionality with style. Available in various finishes, including stainless steel, these ranges are tailored to complement any kitchen décor.

Safety is another critical aspect of the Kenmore 790 series. Features such as oven locks and an auto shut-off function provide additional peace of mind, particularly in households with children.

Overall, the Kenmore 790 series models embody a perfect blend of advanced technology, user-focused features, and strong performance, making them an excellent choice for anyone looking to elevate their kitchen experience. Whether you're a novice cook or an experienced chef, these ranges are designed to simplify cooking while delivering impressive results.
Top Page Image Contents