SETTING THE CONTROLS
Temperature
•The refrigerator control is preset at 37°F (3°C) and the freezer control is preset at 0°F
are the recommended temperature settings for normal use and conditions. Wait 24 hours for the
refrigerator and freezer to reach these temperatures.
•The Refrigerator Temp Control range is from 33°F to 46°F (1°C to 8°C). The lower the number setting, the colder the refrigerator compartment will become.
•The Freezer Temp Control range is from
setting, the colder the freezer compartment will become.
NOTE: When changing control settings, wait 24 hours before making additional adjustments.
After 24 hours, adjust the compartments temperatures as desired.
Dispenser
•When you press the Water button, the Water icon will light up.
•When you press the Ice Select button, either the cube or crushed ice icon will light up.
•Some dripping may occur after dispensing. It is recommended to hold your cup beneath the dispenser for a few seconds after dispensing to catch all of the drops.
_, CAUTION: The control display is operated by touch. Excessive moisture on the display may cause a malfunction. Please keep display clean and dry.
_, WARNING: The dispenser will not work if any door is left open.
Ultra Ice
When you touch the Ultra Ice button, the graphic
[ _ ] will light up in the display and will remain on for 24 hours. It will automatically shut off after
24 hours have passed.
You can stop this function manually by touching the button one more time.
•This function increases both icemaking and freezing capabilities.
Filter Reset
•When the water filter indicator ( c_,._,,,)_ turns on, you have to change the water filter. After changing the filter, press and hold the Ultra Ice (Filter Reset) button for 3 seconds to turn the indicator light off. You need to change the water filter approximately every 6 months.
Light / Light Sensor
•If the light is set to "Auto" mode, dispenser light will automatically turn on and off according to the brightness of the room as detected by the light sensor.
Energy Saver
•Press and hold the Energy Saver button for at least 3 seconds to activate or deactivate the function.
•This function deactivates heaters used to reduce excess exterior moisture and is recommended for increased energy savings.
•The energy saving function is also recommended for periods of time when the doors will not be opened, such as vacations.
18
