Application Guidelines/Water Supply Parameters
Service Flow | 0.5 gpm (1.9 Ipm) | |
Water | Supply | Potable Water |
Water | Pressure | 20 |
Water | Temperature | 33°F - 100°F (0.6°C - 38°C) |
It is essential that the manufacturer's recommended installation, maintenance and filter replacement
requirements be carried out for the product to perform as advertised.
Note: While the testing was performed under standard laboratory conditions, actual performance may vary.
Replacement Filter: ADQ36006102
For estimated costs of replacement elements please call
www.sears.com/partsdirect
3M is a trademark of 3M Company.
NSF is a trademark of NSF International.
© 2009 3M Company. All rights reserved.
To reduce the risk associated with ingestion
of contaminants: Do not use with water that is
microbiologically unsafe or of unknown
quality without adequate disinfection before
and after the system. Systems certified for cyst
reduction may be used on disinfected water that
may contain filterable cysts. EPA Establishment Number
To reduce the risk associated with property damage due to water leakage:
•Read and follow Use Instructions before installation and use of this system.
•Installation and use MUST comply with all state and local plumbing codes.
•Do not install if water pressure exceeds 120 psi (827 kPa). Contact a plumbing professional if you are uncertain how to check your water pressure.
•Do not install where water hammer conditions
may occur. If water hammer conditions exist you must install a water hammer arrester. Contact a
plumbing professional if you uncertain how to check for this condition.
•Do not install on hot water supply lines.
The maximum operating water temperature of this filter system is 100°F (38°C).
•Protect filter from freezing. Drain filter when temperatures drop below 40°F (4.4°C).
•The disposable filter must be replaced every
6 months or more often depending on useage.
30
