Using the Remote Control
Improper use:
,Any location where there is inverter lightingequipment or electronic
spontaneous lighting equipment,
•When cleaning unil Is located in direct
sLmiight, as sunlightmay interfere with the infrared sensor.
•In areas where fluorescent lighting is flickering due to worn out bulbs.
Proper use"
•Operate with tile remote control facing the air cleaner.
,Operate within 23 feet of the _{r cteaner.
•Make sure there are no objects between the remote control and the unit.
OPERATING THE REMOTE CONTROL
•POWER
Use the POWER button to turn the power on and off. A short beep will sound when you turn the unit on or off, Once the unit is on, it will automatically switch into Automatic operation,Turn the unit to manual contmt by pressing one of Ihe FAN CONTROL buttons.
•OFF TIMER
This button is used to set the timer. Press the button repeatedly to set the unit to run for 1, 4, or 8 hoursor to cancel. Each time you press the button, it will advance to the next
The unit will stop operating when the set amount of time runs out,
•FAN CONTROL
•UP
Use this button to switch from Automatic operation and increase the fan speed level.
•DOWN
Use this button to decrease the fan
speed level.
•TURBO
Use this button to switch from Automatic operation and begin the maximum amount of room cleaning end air movement.
•AUTO/SLEEP
Use this button to switch between
Sleep_operatiOn and Automatic
ope;_ion.
•PLASMA CONTROL
Use this buttonto turn the
Note: Follow these instructionsfor best results.
•Place unit at least 7 feet from equipment that emits electric waves such as televisionsor radios.
•Place unit at least 2 feet from the wall.
•Keep sensors away from drafty areas.
•Keep curtains away from sensors, as they may interfere with air intake;outlet.
°Place unit on a stable surface with plenty of air circulation.
1.Remove protective film from the control panel.
2.Remove the front panel by pullinggently on the silver labs
located on each side of the unit,
5.Place the filter cassette back _,,,3m
main unit.
6, Replace the front panel by hooking the panel on the top pf the
unit. Swing pane] in
by pushing gently on
the silver tabs located
on each side of the unit and then lock it into
place.
7.Plug in the power cord to a wall outlet.
8.Press POWER button until a short =beep"
s heard.
POWER
PlasmaDoctor on or off.
3.Pull out the lilte_cassette by grasping the For the first 4 minutes after Ihe unit is
black tabs located | turned on, the unit wiltcheck the air | |
on each side, | ||
quality, and the dust and odor pollution | ||
| ||
| level indicatorswill gash, |
i POWER button !=......
_m---tTo.BObot,I
4. Remove the plastic wrap from the filter cassette,
AUTOISLEEP bu_on _ ......
?2 "°
::: EZ
--t FANCONT.OLt o.oo
[ OFF TIMER button
I
.... | L_ |