9 | This step requires two people to lift and position grill head onto cart. |
Remove tie wrap holding regulator hose to bottom of grill head. Remove packing material. Loosen tie | |
wrap holding ignition wires to bottom of grill head. Retain tie wrap to bundle ignition wires together. |
Carefully lower the grill head onto the cart, aligning slots at bottom of grill head with posts on cart side panels.
Regulator hose must hang inside the cart. Grill head must face open side of cart.
Grill head 
Regulator hose
Post 
10 | Secure front brace in upper hole with one |
shown A. Secure upper back panel in lower hole with one |
flat washer, shown B.
Only left side shown; repeat above instructions for right side.
|
|
|
| A |
|
| ||
|
|
|
|
|
| |||
Qty.4 | Upper back |
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
| panel | B |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
7mm lock washer | 7mm flat | 7mm lock |
|
|
|
| ||
washer | washer |
|
|
|
| |||
Qty.4 |
|
|
|
| 7mm flat | 7mm lock | ||
|
|
|
|
| washer | washer | ||
|
|
|
|
|
|
|
| |
7mm flat washer | ||
Qty.4 | ||
|
22 • 466224411
