Kenmore Automatic Washers owner manual At.TERNATE Locations, Standpipe and Floor Drain Systems

At.TERNATE LOCATIONS-

STANDPIPE AND FLOOR DRAIN SYSTEMS

Siphon break: Must be purchased separately. See chart below.

Standpipe drain system: Needs a two-inch minimum diameter standpipe with minimum carry-away capacity of 17 gallons per minute. Top of standpipe must be at least 39 inches above floor and no higher than 96 inches from bottom of washer.

Floor drain system: Requires a siphon break, see chart below. A minimum carry- away capacity of 17 gallons per minute is required.

I1:you	have:		You will need to buy:
Laundry tub or standpipe			Sump	pump system
taller	than	96 inches	(if not	already	available)
1-inch	diameter standpipe		2-inch	diameter	to 1-inch diameter
			standpipe adapter, Part No. 3363920
Overhead		sewer	Standard 20 gallon, 39-inch tall drain
			tub or utility sink and sump pump
			(available from local plumbing suppliers)
Floor	drain		Siphon	break,	Part No. 285320;
			additional drain hose, Part No. 3357090;
			and Connector Kit, Part No. 285442

Parts listed are available from your local Sears store or Sears Service Center. Call 1-800-366-PART (1-800-366-7278).

12