Whitest Whites |
| Soak |
This cycle is especially designed for cleaning loads of soiled white fabrics with the addition of bleach. Hot washing temperatures assure optimal bleach activity. An additional rinse provides optimal rinse performance to avoid chlorine residues on your laundry. This cycle combines
Heavy Duty
Use this cycle to wash loads of sturdy, colorfast fabrics and heavily soiled garments. This cycle combines
Normal/Casual
Use this cycle to wash loads of
NOTE: For the best energy performance, use the Normal/Casual Cycle.
Use the Soak cycle to remove small spots or stains on fabrics. This cycle provides up to a
Using the Soak Cycle: The Soak cycle provides a soak time with warm or cold water followed by drain.
1.Add detergent only to the High Efficiency “HE” detergent compartment of the dispenser drawer.
2.Press the SOAK button.
3.Choose the desired soak temperature.
4.Select and hold START (approximately 1 second).
Normal Washer Sounds
As with any new product, you will hear sounds that you are not accustomed to. You may hear various sounds when the door is locked or unlocked, and during the washing, rinsing, or spinning process. Between changes in wash actions, there will be momentary pauses. You will hear water spraying and splashing during the wash and rinse cycles. These new sounds and pauses are part of normal washer operation. (See “Troubleshooting.”)
Options
You can customize your wash by adding options to your cycle selections. You can add or change an option after starting a cycle anytime before the selected option begins. Not all Options are available with all cycles. Current selections will glow green. If an option is unavailable with a selected cycle, the light will not illuminate.
3.Select the desired MODIFIERS.
4.To save the cycle press and hold MY CYCLE (approximately 3 seconds) until a beep sounds.
5.Press START.
6.To reuse this cycle at another time, select MY CYCLE and press START.
■See the “Laundry Guide” section for an overview of possible options for each Wash Cycle selection.
■You can select more than one option for a cycle. Some options cannot be added to some cycles. For example, STEAM TREAT™ cannot be added to the Express Wash cycle.
■If an option is unavailable with a selected cycle, there will be 3 short tones, and the light for that option will not glow when selected.
My Cycle
My Cycle allows you to store a customized wash cycle for future use.
To Customize a Wash Cycle:
1.Select a cycle.
2.Select the desired OPTIONS.
Button Sounds
Button sounds are used to notify you of what has been selected or to let you know when something is not available. Button sounds may be turned on or off by selecting BUTTON SOUNDS.
2nd Rinse
A second rinse can be used to aid in the removal of detergent or bleach residue from garments. This option provides an additional rinse with the same water temperature as the normal rinse. This is the default rinse setting for the Whitest Whites cycle. When 2nd Rinse is selected, the indicator light will glow green.
STEAM TREAT™
Use this option for heavily soiled loads that need improved stain treatment, loads with multiple types of stains, or loads you suspect as having stains, but are afraid may have been missed (no sorting or searching for stains). When STEAM TREAT™ is selected, the water temperature of the selected wash cycle is automatically set to warm. The water will then be slowly heated to the temperature selected, along with steam, to aid in stain removal. This option will provide optimal removal of organic stains such as blood. This option is available on the following cycles: Normal/Casual, Heavy Duty, Whitest Whites.
17
