SECTION3

STEP BY STEP GUIDES TO INSTALL

D. CONNECT VALVE AND SALT TANK DRAINS

[]CONNECTSALT TANK OVERFLOW TU-

BING

0 Take the rubber grommet, tube adaptor and

tube clamp (FIG. 12) that are in the parts bag.

@Push the grommet into the hole in the salt tank wall so half is inside and half is outside.

O Push the bigger end of the tube adaptor into the

grommet.

0 Push one end of a length of 3 / 8" I.D. tubing onto

the tube adaptor, using the tube clamp to hold

it in place. Put the other end of the tubing over the floor drain.

Important:

The salt tank overflow is for safety only, If the

salt tank should overfill with water, the over- flow tubing carries it to the drain.

Over-fill water must run downward through the tubing, Do not raise the tubing higher than

the grommet and tube adaptor (FIG. 12).

Do not connect to the valve drain hose you

installedin step 1. Both drains must have a sepa- rate hose or tube.

3 - 6 Deluxe Valve

Problems, Questions? Call 1-800-426-9345 Kenmore Water Line

Page 17
Image 17
Kenmore Water System installation manual Connectsalt Tank Overflow TU Bing

Water System specifications

Kenmore Water System is a comprehensive water purification solution designed to enhance the quality of drinking water in residential settings. Known for its innovative approach, Kenmore has established itself as a trusted name in the industry, offering a range of products that cater to various consumer needs.

One of the standout features of the Kenmore Water System is its advanced filtration technology. The system typically incorporates a multi-stage filtration process that includes sediment filters, activated carbon filters, and advanced reverse osmosis. This multi-layer approach effectively removes contaminants such as chlorine, lead, bacteria, and other harmful substances, ensuring that the water is not only safe to drink but also tastes clean and fresh.

Another notable characteristic of the Kenmore Water System is its user-friendly design. Many products in the line are designed for easy installation and maintenance. With intuitive indicators for filter changes and straightforward setup procedures, users can enjoy the benefits of purified water without the hassle often associated with complex systems. The sleek designs of the water purifiers and softeners also make them an attractive addition to any kitchen or utility area.

In addition to traditional filtration methods, Kenmore has embraced innovative technologies, such as smart sensor technology. Some models feature Wi-Fi connectivity, allowing users to monitor their water quality and system performance remotely through dedicated apps. This technology not only enhances user convenience but also provides real-time insights into water consumption and filter status, promoting proactive maintenance.

Energy efficiency is another priority for Kenmore. Many systems are designed to reduce water waste and energy consumption, making them not only cost-effective in the long run but also environmentally friendly. This aligns with growing consumer awareness and preference for sustainable products.

Kenmore’s customer support is also commendable, with comprehensive warranties and readily available assistance to ensure that users can maximize their water system’s potential. From installation guidance to troubleshooting tips, the support provided reflects Kenmore’s commitment to customer satisfaction.

With a blend of advanced technology, user-friendly features, and effective performance, the Kenmore Water System stands out in the market, defining a new standard in residential water purification solutions.