SECTION3

STEP BY STEP GUIDES TO INSTALL

D. CONNECT VALVE AND SALT TANK DRAINS

ffi CONNECT THE VALVE DRAIN HOSE

Take a length of 3 / 8" inside diameter drain tub- ing and attach one end to the drain fitting (FIG. 12). Use a tube clamp to hold it in place. Put the other end of the tubing over a floor drain, into a

laundry tub, standpipe, or other suitable drain. Check your local codes.

•Leave an air gap of about 1-1/2" between the end of the hose and the drain. This gap is needed so you don't get a back-flow of sewer water into the soften- er. Do not put the end of the hose into the drain or

connect without the air gap.

•Place and support the hose so it does not kink or

have sharp bends. So water pressure does not cause

the hose to "whip", tie or wire it in place. Do not

pinch the hose shut. The softener will not work if

this drain hose is pinched, plugged, closed or re-

stricted in any way.

•Keep the hose lower than the drain fitting. (In some homes, to get to a drain you must raise the

hose and run it over-head. If you need an overhead drain, do not raise the hose more than 8' above the floor. A copper drain tube is best to use.)

COPPER DRAIN TUBE: The plumbing codes where you live may say that you must use a copper valve drain tube. A copper tube is also best to use for

an over-head drain. Use a copper drain tube if the softener is installed outside, or in the sunlight. Heat from the sun makes many kinds of rubber or plastic hose to soften, flatten and close up.

To adapt a copper drain tube to the softener, buy a

compression fitting (1/4 in. female pipe threads x 1/2 in. O.D. tube) and tubing from your local hard- ware store.

DELUXE VALVE

 

 

 

STANDPIPE

 

To drain point

 

 

"_- other than

 

 

floor drain.

 

tie or wire

Support

tubing

 

tubing in plac:;e

in pla_

as

r gap

 

needed.

 

1-1[2"

 

 

airgap

floor drain

/

overflowdrain

tubing (seestep2,

top of page 3-6)

3 - 5 Deluxe Valve

Problems, Questions? Call 1-800-426-9345 Kenmore Water Line

Page 15 Page 17
Page 16
Image 16
Kenmore Water System installation manual Connect Valve and Salt Tank Drains, Ffi Connect the Valve Drain Hose
Page 15 Page 17

Water System specifications

Kenmore Water System is a comprehensive water purification solution designed to enhance the quality of drinking water in residential settings. Known for its innovative approach, Kenmore has established itself as a trusted name in the industry, offering a range of products that cater to various consumer needs.

One of the standout features of the Kenmore Water System is its advanced filtration technology. The system typically incorporates a multi-stage filtration process that includes sediment filters, activated carbon filters, and advanced reverse osmosis. This multi-layer approach effectively removes contaminants such as chlorine, lead, bacteria, and other harmful substances, ensuring that the water is not only safe to drink but also tastes clean and fresh.

Another notable characteristic of the Kenmore Water System is its user-friendly design. Many products in the line are designed for easy installation and maintenance. With intuitive indicators for filter changes and straightforward setup procedures, users can enjoy the benefits of purified water without the hassle often associated with complex systems. The sleek designs of the water purifiers and softeners also make them an attractive addition to any kitchen or utility area.

In addition to traditional filtration methods, Kenmore has embraced innovative technologies, such as smart sensor technology. Some models feature Wi-Fi connectivity, allowing users to monitor their water quality and system performance remotely through dedicated apps. This technology not only enhances user convenience but also provides real-time insights into water consumption and filter status, promoting proactive maintenance.

Energy efficiency is another priority for Kenmore. Many systems are designed to reduce water waste and energy consumption, making them not only cost-effective in the long run but also environmentally friendly. This aligns with growing consumer awareness and preference for sustainable products.

Kenmore’s customer support is also commendable, with comprehensive warranties and readily available assistance to ensure that users can maximize their water system’s potential. From installation guidance to troubleshooting tips, the support provided reflects Kenmore’s commitment to customer satisfaction.

With a blend of advanced technology, user-friendly features, and effective performance, the Kenmore Water System stands out in the market, defining a new standard in residential water purification solutions.
Top Page Image Contents