Regular Operation

This section describes the use of direct operation using the projector and remote control buttons.

Please see the items on Page E-31 "Menu Operation Method" and Page E-34 "Menu Description" for information about operation using the menu.

Select the Input

When the power of the projector is switched on, the input selection (OHP / PC / VIDEO) icon is displayed.

PC VIDEO

OHP

Operation with the Projector

Select the input using the INPUT SELECT buttons. Each press switches the input one step in the sequence of OHP → PC → VIDEO.

Operation with the Remote Control

Select the input using the INPUT SELECT buttons.

NOTE: The input mode at starting time will be the same as it was the last time the projector was switched off.

Adjusting the Volume

Effective only During PC and VIDEO Input

 

Operation with the Projector

 

Volume adjustment cannot be made at the operation

 

panel of the projector.

 

Operation with the Remote Control

Volume adjustment bar

Adjust using the VOLUME (+/-) buttons.

 

NOTE: Once the volume adjustment bar has been displayed, it will disappear when 10 seconds have passed without a volume adjustment operation being made.

E-23