Manuals / Brands / Home Audio / Stereo System / Kenwood / Home Audio / Stereo System

Kenwood 600, NV-500 Standby mode, 2Select "Balance, One-touchoperation, 4Set the adjusted balance, Muting the sound temporarily, Listening through headphones, HOME, INPUT

1 64

Download 64 pages, 1.84 Mb

Muting the sound temporarily

MUTE	MUTE

÷Press again to resume the original volume.

÷This is also cancelled when the volume is changed.

Listening through headphonesInsert the headphone plug into the “PHONES” jack.

PHONES

÷Headphones with a stereo mini plug can be connected.

÷The sounds from all speakers are cut off.

Standby mode

While the standby indicator of the unit is lit in red or amber, a small amount of current is flowing into the unit’s internal circuitry to back up the memory. This condition is referred to as the standby mode of the unit. While the unit is in the standby mode, it can be turned ON from the remote control unit.

When using the remote control unit, each press of the INPUT key switches the input as shown below.

1Press INPUT key

				1 VIDEO1
				1 VIDEO1
INPUT				2 VIDEO2
INPUT				3 CD
				3 CD
				4 TUNER
				5 TAPE
				5 TAPE
	2Press 6(BAND) key

Let's put out some sound 17

One-touch operation

With this feature, when the play key for the CD or TAPE input or the BAND key for the TUNER input is pressed, the power of the unit is switched ON automatically.

÷When the CD or TAPE input selected while a disc or tape has already been loaded, its playback also starts automatically.

STANDBY/TIMER indicator
When power is STANDBY : Lights in red.
When power is ON :			Lights in green.
During timer standby :			Lights in amber.
When timer standby is initiated without set-
ting the current time of the day :
			Blinks in green.
When the protection circuitry is activated :
		Blinks in red. (In this case, unplug the
		power cord and ensure that the
		power cord and ensure that the
		speaker cords are not short-circuited.)
					Basic
					Basic
Adjusting the left and right volume balance					section
Adjusting the left and right volume balance
		1 Display the "Function" menu.
	VIDEO2		SET
	VIDEO2
	CD
	CD
	TUNER	CURSOR
	TUNER	CURSOR
	TAPE

FUNCTION

2Select "Balance".

SET

CURSOR

3Adjusting the left and right volume balance

The right	The left
volume is	4 –P.CALL– ¢ volume is
decreased.	decreased.

4Set the adjusted balance.

ENTER

When the display of the remote control unit shows nothing, information can be displayed by pressing the HOME key.

Contents

COMPACT DIGITAL AUDIO 2Before applying power Safety precautions Contents Basic section Application section Knowledge section IMPORTANT SAFEGUARDS IMPORTANT SAFEGUARDS Special features System connection AM loop antenna connection FM antenna connection System connection Malfunction of microcomputer Connection of the speaker system Main Unit Speaker system NV-600 Connection of Other Accessories (Commercially Available Parts) CHANNEL SPACE setting Controls and indicators 12Operation of remote control unit Selection screen 14Clock adjustment 1. Switch power ON 2. Display the Clock display 3.Display the Clock Adjust SETscreen Page 16Let's put out some sound Basic use method 2.Select the desired source Muting the sound temporarily Listening through headphones Insert the headphone plug into the “PHONES” jack Standby mode 1Press INPUT key Receiving broadcast station 3. Select a station Select with the CURSOR key and press the SET key Collective presetting of stations (auto preset) (Except for Europe and U.K.) Presetting R.D.S. stations (RDS auto memory for Europe and U.K. ) A maximum of 40 stations will be preset When there are many stations and the intended station has not been preset, please also use One-by-onepresetting (manual preset) 1Receive a desired station in advance ("To receive a station that has not been preset") 2With the TUNER input selected, press the SET key to display the Tuner Playback of CD 1. Load a disc 2. Start playback Skipping tracks To skip backward When a key is held depressed: To pause playback To stop playback Playback of tape 1. Load a cassette tape Fast forwarding/rewinding or skipping tape To rewind tape or skip To fast forward tape or When the key is pressed during stop When the key is pressed during play Caution for cassette tape ejection Selecting Dolby NR 1Select "TAPE" with the CURSOR key 26Let's recording Recording on TAPE 2.Select the source to be recorded 3. Select the tape transport direction 4. Set the recording condition 5.Start recording 28R.D.S. (Radio Data System) (for Europe and U.K.) This unit is equipped with the following functions utilizing RDS data : PTY (Program Type Identification) Search : PS (Program Service Name) Display : EON (Enhanced Other Network) : Searching for a desired program type (PTY search) 3Select "PTY ✻✻✻ 4Select the desired PTY R.D.S. (Radio Data System) To be able to listen to the desired information at any time (EON) 1Select the desired information 1 Select the TUNER input 3Select "EON ✻✻✻ 4Select the desired EON mode 2Receive an RDS station 3Wait for the desired information In case of waiting for information with an RDS station without EON function In regard to TP (Traffic Program) indicator 32 Playback of CD Listening in the desired sequence (program playback) 2Play the programmed tracks Checking the program (In stop mode only) Use the following procedure to check the programmed tracks 1Select the CD input 4Select the "Check Repeated playback Listening to an unexpected title sequence (random playback) ÷It is not possible to perform random playback of programmed tracks Random repeat playback To cancel random playback 36Convenient Recording Methods Selection of the Recording Type Records all tracks in a CD onto tape Records the CD track being played onto a Recording an entire CD onto tape (CD direct recording) (CD direct recording) 1 Display the "Function" menu 2Select the message to be displayed, "CD→Tape Rec Recording every desired track in CD onto tape (CD one-trackrecording) Convenient Recording Methods Recording desired CD tracks in a desired order onto tape (CD program recording) 3Select the "Program Rec 4Program CD tracks 5Start recording 40Tone control and sound field effect adjustment Bass Boost and tone control Dolby Virtual setting DSP mode setting 44Timer operation Setting the O.T.T Setting the timer playback 7Select a preset radio station (This step is required only when the tuner input is selected in the above.) 8Select the message to be displayed, "AI-Play"or “Normal-Play” 9Press the ENTER key to complete the setting Sleep Timer (Sleep) 2 Select the message to be displayed, "Sleep On” or "Sleep OFF” 3Set the time period until the power is to be turned OFF Timer recording (This step is required only when the tuner input is selected in the above.) 48Checking the time information display of CD CD Single Time display CD Total Time display Adjusting the display contrast 50Remote control of external components Remote control of external components Registering the component connected to the rear-panelVideo1 or Video2 input 2Select the message to be displayed, "Video1" or "Video2 3Select the type of the com- ponent (VCR, DVD, etc) 4Select the manufacturer 5Select the type of the remote control codes 6Check the remote control operations Remote control of external components TV control screen This screen consists of a single page VCR control screen This consists of 2 pages Each press of the SET key switches the pages alter- nately 54Important Items Maintenance Reference Important Items Disc handling precautions Handling Cleaning Storage Discs which can be played with this unit FCC WARNING NOTE: WARNING NOTICE: In case of difficulty In case of difficulty CD player section A CD is placed in the player but it cannot be played Sound skips “Text Full” is displayed Cassette deck Sound cannot be produced by pressing the play key No operation occurs even when an operation key is 60INDEX Menu display chart 62Specifications NV-600 NV-500 For your records