To use your mill, Care and cleaning, Speed, Power unit

to use your mill

1Put your ingredients into the jar. Fill it no more than half full.

2 Fit the sealing ring - ensuring the seal is fully located under the rim of the blade unit.

3	Turn the blade unit	upside down.
	Lower it into the jar, blades down .
	Turn anti-clockwise to lock.
4	Place the mill onto the power unit
	and turn clockwise to lock .

5Select a speed or use the pulse control.

6After milling, you can replace the blade unit with the storage lid.

speed	usage/food items	max. quantity
1	Frothing milk	1 litre
	Light mixes e.g. batters, milkshakes,
	scrambled egg	1 litre

2	Soups & drinks	1.6 litres
	Thicker mixes e.g. pâtés

	Mayonnaise	3 eggs + 450ml
		oil

	Smoothie drinks
	Place the fresh fruit and liquid ingredients in	800ml
	first (includes yoghurt, milk and fruit juices)	liquid
	Then add ice or frozen ingredients (includes
	frozen fruit, ice or ice cream)

	Mill - use for dry ingredients only	50g
	Herbs, nuts and coffee beans

(P)	Operates the motor in a start/stop action. The
pulse	pulse will operate for as long as it is held in
	position.
	Ice crushing - operate the pulse in short bursts	6 cubes
	until crushed to the desired consistency.

●Always switch off, unplug and dismantle before cleaning.

●Empty the goblet before unscrewing it from the blade unit.

●Don’t immerse the blade unit in water.

●Wipe with a damp cloth, then dry.

●Don’t immerse the power unit in water.

●Push excess cord inside the back of the power unit.

1Remove the blade unit from the

goblet or mill by turning to the

unlock position to release.

2Remove and wash the sealing ring.

3Don’t touch the sharp blades – brush them clean using hot soapy water, then rinse thoroughly under the tap. Don’t immerse the blade unit in water.

4Leave to dry upside down.

Wash by hand, then dry.