to use your mill (if supplied)
1Put your ingredients into the jar. (Refer to the mill recommended usage chart).
2Fit the sealing ring into the mill blade unit marked – ensuring the seal is located correctly in the grooved area.
●Ensure that the seal is fitted correctly.
3Then clip the blade unit into the mill base .
4Turn the mill blade assembly upside down. Lower it into the jar, blades down. Turn in a clockwise direction to lock.
5Place the mill onto the power unit.
6Select a speed or use the pulse control. (Refer to the mill recommended usage chart).
7After milling, you can replace the blade assembly with the mill lid.
hints
●For optimum performance when processing spices we recommend that you do not process more than 50g at a time in the mill.
●Whole spices retain their flavour for a much longer time than ground spices so it is best to grind a small quantity fresh at a time to retain the flavour.
●To release the maximum flavour and essential oils whole spices are best roasted prior to milling.
●Herbs are best chopped when clean and dry.
mill recommended usage chart
Ingredients | Max Qty | Speed | Operating time |
Nuts | 50g | 5 | 10 seconds |
|
|
|
|
Coffee Beans | 50g | 5 | 30 seconds |
|
|
|
|
Uncooked Meat | 100g | Pulse | 5 seconds |
Beef Steak - cut into 21⁄2 cm cubes |
|
|
|
Herbs | 10g | 5 | 5 seconds |
Baby Food & Fruit Purees | 100g |
| 30 seconds |
Spices - black peppercorns, | 50g | 5 | |
cardamom seeds, cumin seeds, |
|
|
|
coriander seeds, fennel seeds and |
|
|
|
whole cloves |
|
|
|
care and cleaning
●Always switch off, unplug and dismantle before cleaning.
●Empty the goblet before unscrewing it from the blade unit.
●Don’t immerse the blade unit in water.
●The blender goblet and mill jar can be washed in your dishwasher.
power unit
●Wipe with a damp cloth, then dry.
●Don’t immerse the power unit in water.
●Store excess cord in the storage
area at the back of the power unit .
blade assembly
1Unscrew the blender or mill base from the goblet. Then remove the blade unit by pushing up from underneath.
●Care should be taken when removing the blade unit from the blender or mill base.
5