Kenwood C-V301, C-V351 Sleep timer, To cancel, Check the reservation content, To change the reserved contents, To set the same timer program again, Sleep, OFF, GRC, TIMER, TIMER

Timer operation

C-V351/C-V301 (EN)

The reservation contents cannot be cleared. The contents are cleared

only when they are changed.

49

Check the reservation content.

Each press of the key switches the TIMER numbers as follows.

		1 TIMER 1	(Contents of the timer 1 are displayed.)
		2 TIMER 2	(Contents of the timer 2 are displayed.)
Main unit
		3 TIMER 1, 2 (Contents of the timer 1 and timer 2 are displayed.)
	Select the TIMER number to be checked.	4 TIMER OFF

TIMER MODE

÷The reserved contents will be displayed for 2 seconds per item. After this, the previous display content appears again.

To change the reserved contentsRestart the procedure of “Timer programming” from the beginning.

When timer operation is not required

Main unit

Press so that all TIMER No. indicators are

TIMEROFF.

MODE

Each press of the key switches the TIMER numbers as follows. 1 TIMER 1 (Only the timer 1 is carried out.)

2TIMER 2 (Only the timer 2 is carried out.)

3TIMER 1,2 (Both timers 1 and 2 are carried out.)

4 TIMER OFF (No timer operation is carried out.)

÷The reservation contents are held in memory.

To set the same timer program again

Main unit

	Press so that the desired TIMER No. indica-
TIMER	tors light.
MODE

Sleep timerSetting the number of minutes until the unit is put to standby mode.

Main unit GRC

1Switch the unit from STANDBY mode toON mode.

ON/STANDBY

ON/STANDBY

2Set the time.

RC	Main
	Menu
	ENTER
SLEEP	Main
	Menu
	ENTER

Sleep

Each press of the key switches the TIMER numbers as follows. 1 TIMER 1 (Only the timer 1 is carried out.)

2TIMER 2 (Only the timer 2 is carried out.)

3TIMER 1,2 (Both timers 1 and 2 are carried out.)

4 TIMER OFF (No timer operation is carried out.)

÷Also prepare the disc or tape and adjust the listening volume.

÷This unit is turned STANDBY automatically after the set time has elapsed.

÷The remaining sleep time can be displayed by selecting the Sleep icon while the SLEEP indicator is lit.

÷Each press decreases the time by 10 minutes. The maximum time that can be set is 90 minutes.

90=80=70...30=20=10=Cancel=90=80...

	SLEEP
s L E E P 9 )
Duration for sleep timer.	Lights up.

To cancel

ENTER

Turn STANDBY or select “Sleep” icon repeatedly until the sleep time is cancelled.