Manuals / Brands / Home Audio / Stereo Receiver / Kenwood / Home Audio / Stereo Receiver

Kenwood C-V301, C-V351 Memory backup function, Set up code chart, Remote control unit, In case of difficulty, Cause, Remedy, Symptom, The GRC display is abnormal

1 56

Download 56 pages, 1.31 Mb

In case of difficulty

C-V351/C-V301 (EN)

55

Remote control unit

Symptom	Cause	Remedy
Remote control operation is not possible.	÷ Batteries are exhausted.	÷ Replace with new batteries.	@)
	÷ The remote control unit is too far away from the	÷ Operate the remote control unit within the
	main system, controlling angle is too large, or	controllable range.	!
	there is an obstacle in between.
	÷ The audio cords and system control cords are	÷ Connect properly referring to “System con-
	not connected properly.	nection”.	57
	÷ The source component to be operated does not	÷ Place the tape(s) or disc in the source compo-
	contain the tape(s) or disc.	nent to be played.

The GRC screen is not displayed.	÷ Batteries are exhausted.	÷ Replace with new batteries.	@

The GRC display is abnormal.	÷ Batteries are removed while something is dis-	÷ Remove and replace batteries after the infor-
	played.	mation display has disappeared.

Set up code chart

Although each setup code is designed to work with a number of different models, certain codes may not work with some models. (Also, certain codes may only operate some of the functions available on a given model.)

With some models, be sure to keep the ENTER key pressed for a while.Memory backup function

Please note that the following items will be deleted from this unit’s memory if the power cord is disconnected from the AC outlet for approximately three days.

÷The input selection is cleared and the TUNER input is selected.

÷The volume setting is cleared and the volume is set to -65 dB.

÷The receiving band setting is cleared and the FM band is selected.

÷The frequency setting is cleared and 87.5 MHz is selected.

÷The preset station memory is cleared.

÷The voice activation setting is cleared and the activation by non- specified person is set.

÷The surround setting is cleared and reset to the initial condition.

÷The clock and timer setup is cleared and the clock display shows AM 12:00 which is blinking.

Contents

INSTRUCTION MANUAL B60-4349-00EN Before applying power Caution : Read this page carefully to ensure safe operation 2 Units are designed for operation as follows Europe and U.K For the United Kingdom Contents Caution : Read the pages marked carefully to ensure safe operation Operating procedure steps (Left half) Supplementary explanation (Right half) 1Select the DSP surround mode System connection Make connection as shown below Do not plug in the power lead until all connections are completed Analog disc turntable (with built-inequalizer amp) 6Connection of video components (LD player, VCR, DVD) Monitor TV LD player To wall AC outlet VCR About the system control connections Connection example CONTROL CENTER POWER 8Connection of antenna Connection method to each antenna terminal 1 Push lever 2 Insert cord 3 Return lever Controls and indicators Display 1 (ON/STANDBY) key 2Remote sensor 3 TIMER SET key Switching the display mode (DISPLAY key) For C-V351 (Optional with the C-V301) Model:GRC-151 Infrared system Approximate operating range 1Loading batteries 2Check the display 3Select "Model 2 4Enter the selection To reset GRC setting Setup of GRC according to the cassette deck in use Set Up MD Set Up DVD Setup of GRC according to the MD recorder in use Setup of GRC according to the DVD player in use M D Check the operation of the component Use the numeric keys as shown below Switching the INPUT SELEC TOR (Selecting the CD input) of the AV CONTROL CENTER Remote control of components from the GRC Controlling the components connected through system control cords Preparations Operating the tuner Operating the CD player Operating the cassette deck 1 Select the ”Tape 1“ input 2Display the cassette deck operation menu Tape B O.T.E Operating the MD recorder 1 Select the ”MD“ input 2Display the MD operation menu ÷Any of the keys which can control the MD recorder can be selected of the MD recorder Remote control with the “RC” unit (For C-V301) 20Names and functions of the keys 1 (POWER) key 2A j B switch panied with the illustration of Convenient functions One-touchoperation and easy operation features (CD player, cassette deck, and DVD player) ÷Use the main unit keys for operation Function available with the play key operation 1Press the ON/STANDBY key to ON 2Select the input source 3Play the selected source 4Adjust the volume Sound adjustment functions Adjusting the tone 1Select STEREO 2Select the BASS or TREBLE adjustment 1 BASS C D Source Direct 3 Playback the source To cancel Select the Source Direct (S.DIRECT) again Recording To record a music source 1Select the source to be recorded 2Set the recording unit (cassette deck or MD recorder) to recording mode 9;) ) MHz RDS (Radio Data System) FM B B C 1 ) 2;5 ) MHz 1Set the INPUT SELECTOR to “TUNER” 2Set the receiving band to “FM” 3Preset radio stations by AUTO MEMORY Order of radio station presetting Other stations than the RDS stations can be stored in Storing radio stations manually in preset memory 1Select the receiving band 2 Select a station or frequency 3 Press the Memory key during receiving a station Proceed to step 1Select the PTY search mode 2Select the desired program type 3Start the search 1 @FM 3Receive one of RDS stations 4Wait for a reserved reception to start Ambience effects Sound modes Dolby Pro Logic In case center speaker is not used Dolby 3 Stereo DSP mode Ambience effects Recommended speaker installation What is DSP 1Select the Dolby Pro Logic surround mode 2Adjust the balance. “L- - - - - - -R” How to calculate the proper delay time 4Adjust the delay time. “DELAY” 1Select the desired mode 2Play video software 3Adjust the sound level 2Adjust the adjustment item (example) 3Adjust the Bass tone level. “BASS” 4Adjust the Treble tone level. “TREBLE” 5Adjust the balance. “L- - - - - - -R” - - - yt - - R C c h + 2 dB 7Adjust the right surround speaker level. “SRch” s R c h + 1 dB 8Adjust the left surround speaker level. “SLch” s L c h + 1 dB 2 ) ms !Adjust the input level. “INPUT” (DSP) 2Select the adjustment parameter 3Adjust the effect level. “EFFECT” To return the GRC display to the Main menu: 1Activate the clock adjustment mode 2Enter the hour 3Enter the minute 1Make preparations for the play (recording) 2Adjust the listening volume 3Set the (ON/STANDBY) switch to STANDBY 4Select a TIMER No 5Enter the ON time (Hour) TIMER 1O N T I M E TIMER 1A M 1 ):1 ) TIMER 1O F F T I ME TIMER 1A M 1 1:1 ) 9Make the desired reservation Select the TIMER No.to be used Check the reservation content Select the TIMER number to be checked To change the reserved contents Sleep timer Setting the number of minutes until the unit is put to standby mode 1Switch the unit from STANDBY mode to ON mode 2Set the time AIWA HYPSON QUELLE AKAI IMPERIAL ACURA ADMIRAL ADYSON AGB AKURA MIVAR NEI NIKKAI NOBLIKO NOGAMATIC ALDES ALLANTIDE ANKARO ANTTRON AST In case of difficulty How to reset the microcomputer 1Unplug the power cord from the wall outlet While holding the Amplifier Memory backup function Specifications Caution : Read this page carefully to ensure safe operation Audio section Total harmonic distortion (1 kHz, 1V) 0.01 %