To adjust the item:
After selecting the item, press the + or – button to adjust it and press the view button to enter the adjusted value.
6End the setting.
Overhead View Image Adjustment (Centering)
This item adjusts the center of the camera installation position.
1Select “OVERHEAD VIEW IMAGE ADJUSTMENT (CENTERING)”.
2Press the + or – button of the switch unit so that the two white lines appear on the position corresponding to the center line of the vehicle.
Adjustment is possible by one step to the left and right. If the adjustment is not possible in the currently available range, change the camera position before retry.
•Select [Back] to go back to the previous adjustment item.
•Select [Next] to advance to the next adjustment item.
•Selecting [Reset] in an individual adjustment item resets the camera setting of that item to the default.
•Select [
] to invert the icon upside down.
3After completing the adjustment, press the view button.
Advances to “OVERHEAD VIEW IMAGE ADJUSTMENT
Overhead View Image Adjustment
This item adjusts the horizontal angle (in the rotary direction) of the camera installation position.
1Select “OVERHEAD VIEW IMAGE ADJUSTMENT
2Press the + or – button of the switch unit so that the center of the parking space is displayed vertically.
Adjustment is possible by one step to the left and right. If the adjustment is not possible in the currently available range, change the camera position before retrying.
3After completing the adjustment, press the view button.
Advances to “OVERHEAD VIEW IMAGE ADJUSTMENT
English 9