System Connection (CMOS-300 only)

•When connecting the camera to a Kenwood navigation system (head unit) equipped with the camera control function, use the provided head unit connection cord. This allows the head unit to switch the display view and adjust the camera as well.

•When using two CMOS-300 units (for the front and rear), it is required to set an ID for the front camera. For details, see “Camera ID Setting” (page 13).

•Connect the power supply in the same way as “Basic Connections”. The reverse detection cord (purple/white) is to be connected as required.

•The provided switch unit is not used in the system connection.

Connection of 2 Cameras

Video cord

Connect to the dedicated rearview camera video input.

Camera connection cord

Camera 1 (Used as rearview camera) (ID1: Default)

CAM+ (green/red)

Connect to the camera control terminals of the

head unit.

CAM- (green/white)

Head unit connection cord:

 

 

 

 

 

2 m (78.7 inch)

Power supply box

Power supply box

Camera 2 (Used as front view camera)

 

(Change ID to ID2.)

Camera connection cord

 

Video cord

Connect to the external video input. Select the external video input to check the camera image.

English 7