Connections
Basic Connections
| Connect to the rearview camera video input or to the | |
| external video input of the video monitor. | |
| Video cord: 1.5m (59.1 inch) | |
Navigation system/video monitor | Camera connection cord | |
(separately available) | ||
|
Camera
Connect the camera to the camera connection cord.
Camera’s cord length: 5 m (197 inch), Camera connection cord
length: 3 m (118 inch)
Power supply box
CAMERA
CAMERA
Switch unit
Power cord
When the monitor does not have the rearview camera input and switches the
input upon detection, connect to vehicle's reverse lamp harness.
Reverse detection cord (purple/white): 10 cm (3.94 inch)
REVERSE
Not used when connecting to a navigation system or monitor with a dedicated rearview camera video input.
Engine key
Fuse
Main fuse
+ | – |
Battery
GND
Accessory power |
| Fuse (2A) |
(ACC) | ACC | 2A |
|
Accessory cord (Red): 1 m (39.4 inch)
Connect to the
GND cord (Black): 1 m (39.4 inch)
Connect to a metallic part of vehicle (a part of chassis connected to the negative side of power supply).
CAUTION
・If the engine key of your vehicle does not have the ACC position, branch the wire energized when the engine key is ON and connect it to the accessory power cord.
・Before proceeding to connections, make sure that the engine key is not inserted and disconnect the
6