Kenwood DDX418 Installation/Removing the Unit, Installing the Unit, Installing the Escutcheon, Removing the Escutcheon

Installation/Removing the Unit

Installing the Unit

Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.

⁄

•Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip).

Installation on Toyota, Nissan or Mitsubishi Car using Brackets

Accessory 3 (M5x6mm) or Accessory 4 (M5x7mm)

Car Bracket

Accessory 3 (M5x6mm) or Accessory 4 (M5x7mm)

Installing the Escutcheon

1Attach accessory 5 to the unit.

Accessory 5

Removing the Escutcheon

1Engage the catch pins on the removal tool 6 and remove the two locks on the lower level. Lower the frame and pull it forward as shown in the figure.

Accessory 6

Catch

Lock

⁄

•The frame can be removed from the top side in the same manner.

2When the lower level is removed, remove the upper two locations.

6DDX418/DDX4048BT/DDX318/DDX3048