Connection
If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box.
TV tuner (Optional)
TVANTENNAINPUT
TOMONITORUNIT
Disc Changer etc.(Optional)
C
B
Antenna Cord | FM/AM antenna input | |||
|
|
|
|
|
Connection cable (Included in the disc changer)
Connect to the vehicle's parking brake detection switch harness using the supplied relay connector.
For the sake of safety, be sure to connect the parking sensor.
PRK SW | Parking sensor wire (Green) |
|
Reveres sensor wire (Pink)
To Vehicle's reverse lamp harness
Dimmer control wire (Orange/White)
To car light control switch
Ground wire (Black) - (To car chassis)
Battery wire | ( 5A ) | |
(Yellow) | ||
|
A
Ignition wire (Red)
Steering remote control input
To Steering remote (Light Blue/Yellow)
If no connections are made, do not let the cable come out from the tab.
B
Battery wire (Yellow)
C | Ground wire (Black) - (To car chassis) |
|
| Ignition key | Connect to the terminal that is grounded when either | |
| switch | ||
|
| the telephone rings or during conversation. | |
|
|
| |
|
| ACC | To connect the Kenwood navigation system, |
|
| A | |
|
| consult your navigation manual. | |
Car fuse |
| B | Depending on what antenna you are using, |
| connect either to the control terminal of the | ||
box |
| Car fuse box | motor antenna, or to the power terminal for the |
(Main fuse) |
|
| booster amplifier of the |
| C | When using the optional power amplifier, | |
+ | connect to its power control terminal. | ||
– |
|
|
Battery | To "EXT.AMP.CONT." terminal of the amplifier | |
having the external amp control function. | ||
|
Mute wire (Brown)
Motor antenna control wire (Blue)
Power control wire (Blue/White)
External amplifier control wire (Pink/Black)
If no connections are made, do not let the cable come out from the tab.
4 English