Playing a USB device

When connecting a USB device, playback starts automatically.

Remove the USB device

Press on the USB control screen to enter the USB suspend mode, and then remove the USB device. Refer to <USB Device Control> (page 40).

¤

• Removing the USB device before entering the USB suspend mode may result in damaging the data in the USB device.

⁄

•If the USB source is selected when a USB device is not connected, "No Device" is displayed.

•When the playback is stopped and then restarted, the playback will start from the point where it was stopped at the last time. Even if the USB is removed and connected again, the playback will start from the last stopped point unless the contents in the USB device is changed.

•Make sure that the USB device is connected firmly.

C

Switches the function screen

The function control screen switches in the following order each time you press the button.

Picture & Easy Control Panel

Source Control Screen

Picture Panel (OFF)

The following buttons are always displayed on the source control screen.

6

1

2

3

4

5

 

5

1Displays the Source Select screen. (page 53)

2Returns to the Source Control screen.

3Displays the Audio Control Menu screen. (page 86)

4Displays the SETUP Menu screen. (page 66)

5Adjusts the Volume.

6Clock display

⁄

•Touch displayed at bottom right of various screens to return to the original screen.

Next page 3

English 13