Setup Menu
AV Interface Setup
You can set audio and visual (AV) interface parameters.
1Display the AV Interface screen
Touch [AV Interface] in the SETUP Menu (page 66).
2Setup each item
1
2
3
4
5
1Sets a name to be displayed when you
select a system that is connected via the AV INPUT1 port. (
VIDEO1)
⁄
•If you have set the navigation system connection to
2Sets an image display of the system that is connected via the AV INPUT2 port. (
Off ) "Off": When the image source is switched, an image entered via the AV INPUT2
port is displayed.
"On": When an image signal is entered via the AV INPUT2 port, this image is displayed.
3Sets a name to be displayed when you select an image of the system that is
connected via the AV INPUT2 port. (
VIDEO2)
4Selects a navigation system connection.
(
RGB)
"RGB": Allows the Kenwood’s Navigation System to connect via its interface cable.
"Off": Must be used if no navigation system is connected. (The navigation display is cancelled when the AV source is switched.)
5Return to the original screen.
6
7
8
6Selects an AV source to be output at the AV OUTPUT port. (
7Sets a method to switch to the rear view camera video display. (
Off )
"On": Switches to the rear view camera video display when engaging the shift knob of car to "Reverse".
"Off": Switches to the the rear view camera video display when engaging the shift knob of car to "Reverse" and then pressing the [V.SEL] switch several times.
8You can flip the left and right of the rear view camera video display. Set to "Reverse" and the the rear view will be displayed left
and right in mirror image on the screen. (
Off )
9
10
11
12
9Selects speakers used for voice guidance of the navigation system. (
"Front All": Uses both front speakers for voice guidance.
pAdjusts the volume for voice guidance of the navigation system. (
21)
72DDX8029