Connection

If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box.

TV tuner (Optional)

TVANTENNAINPUT

TOMONITORUNIT

Disc Changer etc.(Optional)

C

B

Antenna Cord

FM/AM antenna input

 

 

 

 

 

IConnection cable (Included in the disc changer)

Connect to the vehicle's parking brake detection switch harness using the supplied relay connector.

For the sake of safety, be sure to connect the parking sensor.

PRK SW

Parking sensor wire (Green)

 

Reveres sensor wire (Pink)To Vehicle's reverse lamp harnessDimmer control wire (Orange/White)To car light control switchGround wire (Black) - (To car chassis)
Battery wire

( 5A )

(Yellow)

 

A

Ignition wire (Red)
Steering remote control inputTo Steering remote (Light Blue/Yellow)

If no connections are made, do not let the cable come out from the tab.

B

Battery wire (Yellow)

C

Ground wire (Black) - (To car chassis)

 

 

Ignition key

Connect to the terminal that is grounded when either

 

switch

 

 

the telephone rings or during conversation.

 

 

 

 

 

ACC

To connect the Kenwood navigation system,

 

 

A

 

 

consult your navigation manual.
Car fuse

 

B

Depending on what antenna you are using,

 

connect either to the control terminal of the

box

 

Car fuse box

motor antenna, or to the power terminal for the

(Main fuse)

 

 

booster amplifier of the film-type antenna.

 

C

When using the optional power amplifier,

+

connect to its power control terminal.

–

 

 

Battery

To "EXT.AMP.CONT." terminal of the amplifier

having the external amp control function.

 

Mute wire (Brown) .Motor antenna control wire (Blue) .Power control wire (Blue/White)External amplifier control wire (Pink/Black)
If no connections are made, do not let the cable come out from the tab.4 English