AV Interface Setup
You can set audio and visual (AV) interface parameters.
1Display the AV Interface screen
Touch 
in the "SETUP Menu" screen (page 62).
2Setup each item
1
2
3
4
5
1Moves to the "AV Interface 2" screen.
2 Sets a name to be displayed when you
select a system that is connected via the AV
INPUT port. (
"VIDEO")
3 Sets an image display of the system that is
connected via the AV INPUT port. (
"Off")
"Off": When the image source is switched, an image entered via the AV INPUT port is displayed.
"On": When an image signal is entered via the AV INPUT port, this image is displayed.
4 Selects a navigation system connection. (
"RGB") (DDX712/DDX7032 only) "RGB": Allows the Kenwood's Navigation
System to connect via the AV INPUT port.
"Off": Must be used if no navigation system is connected. (The navigation display is cancelled when the AV source is switched.)
5 Returns to the "SETUP Menu" screen.
6 |
| 7 |
8
9
10
11
6Returns to the "AV Interface 1" screen.
7 Moves to the "AV Interface 3" screen.
8 Selects an AV source to be output at the AV
OUTPUT port. (
9 Sets a method to switch to the rear view camera video display. (
"Off")
"On": Switches to the rear view camera video display when engaging the shift knob of car to "Reverse".
"Off": Switches to the rear view camera video display when engaging the shift knob of car to "Reverse" and then pressing the [NAV] button for more than 1 second.
p You can flip the left and right of the rear view camera video display. Set to "On" and the the rear view will be displayed left and
right in mirror image on the screen.
(
"Off")
q Returns to the "SETUP Menu" screen.
12
13
14
15
16
17
wReturns to the "AV Interface 2" screen.
eSelects speakers used for voice guidance of
the navigation system. (
for voice guidance.
"Front All": Uses both front speakers for voice guidance.
rAdjusts the volume for voice guidance of the navigation system. (
"21")
Next page 3
English 67